|
Catalog Number EL5ML |
Device Problems
Failure to Form Staple (2579); Insufficient Information (3190)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 12/01/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(4).Date sent: 1/3/2024 d4: batch # unk attempts are being made to obtain the following information.To date no response has been provided.If further details are received at a later date a supplemental medwatch will be sent: "could you please clarify what was the issue with the device? was the handle broken? were the jaws damaged? was the device difficult to fire? difficult to open? does the device fired any malformed clips? does the device would not fire? if other please specify" attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Event Description
|
It was reported that during an appendectomy procedure, device malfunctioned, broke inside patient around the deployed clip area.Surgeon was able to retrieve with no issues.Case was completed with a new device with no patient harm.
|
|
Manufacturer Narrative
|
(b)(4).Date sent: 2/2/2024.D4: batch #x70356.Investigation summary: the product was returned to ethicon for evaluation.Visual inspection and functional testing were conducted on the returned device.Visual analysis of the returned sample determined that the el5ml device was returned with no apparent damage.In addition, the tyvek was returned along with the instrument.In an attempt to replicate the reported incident, the device was tested for functionality.Upon firing of the device, the tip of the advancer was noted broken causing that the clip did not fully advance into the jaw.Due to the condition of the device, no functional testing could be performed to evaluate the incident reported.In order to evaluate the condition of the internal components the device was disassembled; upon disassemble nine(9) clips were found inside clip track.The event reported was confirmed and it is related to improper use of the device.Please note that prior to loading a clip in the jaws, ensure that the demarcation between the jaws and the device shaft is past the end of the trocar cannula.Additionally, excessively applying a side load to the jaws, causing them to partially collapse could result in a clip malformation.The device jaws should be fully open and parallel upon initiating the firing of the device.Please reference the instruction for use for more information.As part of ethicon¿s quality process, all devices are manufactured, inspected, and released to approved specifications.A manufacturing record evaluation was performed for the finished device batch x70356 number, and no non-conformances were identified.
|
|
Search Alerts/Recalls
|
|
|