• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: ZIMMER BIOMET, INC. COMP PRIMARY STEM 7MM MICRO; EXTREMITIES IMPLANTS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

ZIMMER BIOMET, INC. COMP PRIMARY STEM 7MM MICRO; EXTREMITIES IMPLANTS Back to Search Results
Model Number N/A
Device Problem Adverse Event Without Identified Device or Use Problem (2993)
Patient Problem Bone Fracture(s) (1870)
Event Date 08/02/2023
Event Type  Injury  
Event Description
It was reported that the patient had a fracture reverse shoulder about 3 years ago.Unfortunately, the primary had failed as the patient suffered a peri-prosthetic fracture below the distal tip of the in-situ stem, while using their arm to push off of a chair.During the revision the existing stem was removed (which took a large chunk of proximal humeral bone with it).The surgeon then reamed down the humeral canal to replace the stem with an srs humeral component.During reaming he found that the reamer skived off an existing cement restrictor form the primary procedure and perforated the humeral canal.He then had to drill in to the cement restrictor to be able to remove it before proceeding with humeral reaming.The surgeon was able to successfully complete the humeral preparation before trialing the new humeral component on the existing in situ glenosphere.The surgeon began with the smallest srs proximal body before building up to the 68mm body.He also trialed a number of humeral tray and poly constructs (from smallest to largest) before settling on the +5mm thickness tray and +3mm thickness poly.This was then implanted before closing up.
 
Manufacturer Narrative
(b)(4).Mechanical (g04) - stem.H3: customer has indicated that the product will not be returned to zimmer biomet for investigation, as the hospital did not return it.Reported event was confirmed as the radiographs provided showed a fracture.Radiographs identified the following: a reversetype left shoulder arthroplasty is present.There is a comminuted and mildly displaced periprosthetic fracture of the proximal humerus resulting in implant loosening.Glenohumeral implant alignment is maintained without dislocation.Device history record was reviewed and no discrepancies relevant to the reported event were found.A definitive root cause could not be determined.If any further information is found which would change or alter any conclusions or information, a supplemental will be filed accordingly.Zimmer biomet will continue to monitor for trends.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
COMP PRIMARY STEM 7MM MICRO
Type of Device
EXTREMITIES IMPLANTS
Manufacturer (Section D)
ZIMMER BIOMET, INC.
56 e. bell drive
p.o. box 587
warsaw IN 46581
Manufacturer (Section G)
ZIMMER BIOMET, INC.
56 e. bell drive
p.o. box 587
warsaw IN 46581
Manufacturer Contact
jennifer rapsavage
56 e. bell dr.
warsaw, IN 46582
5745260384
MDR Report Key18574762
MDR Text Key333659024
Report Number0001825034-2023-03086
Device Sequence Number1
Product Code HSD
UDI-Device Identifier00880304554085
UDI-Public(01)00880304554085(17)271130(10)660360
Combination Product (y/n)N
Reporter Country CodeAS
PMA/PMN Number
K060692
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,Health Professional,Company Representative
Reporter Occupation Physician
Type of Report Initial
Report Date 01/24/2024
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Health Professional
Device Model NumberN/A
Device Catalogue Number113607
Device Lot Number660360
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Initial Date Manufacturer Received 08/02/2023
Initial Date FDA Received01/24/2024
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Date Device Manufactured11/30/2017
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Removal/Correction NumberN/A
Patient Sequence Number1
Treatment
SEE H10
Patient Outcome(s) Hospitalization; Required Intervention;
Patient SexFemale
-
-