MAUDE Adverse Event Report: SOFRADIM PRODUCTION SAS PROGRIP; MESH, SURGICAL, POLYMERIC

Model Number LPG1614

Device Problems Difficult to Insert (1316); Product Quality Problem (1506)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/23/2024

Event Type  malfunction  

Manufacturer Narrative

D10 concomitant products: oms-t10sb, oms-t10sb trocar balloon o armatures10 (lot#:p3j0945).Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

According to the reporter, during a laparoscopic totally extra-peritoneal (tep) unilateral inguinal hernia procedure, when the surgeon was unfolding the mesh to place and fixate it into the tissue, the surgeon realized it was incorrectly folded.The surgeon extracted the mesh out of the patient through the port, and the mesh got stuck in the seal, and the seal dislodged.Moreover, there was a rapid loss of abdominal pressure.It was noted that the mesh was able to be pulled out with the seal attached to it.The surgeon reused the same port without the seal, and the surgical assistant used the camera and their hand with a surgical pack to cover the seal and to stop gas from leaking.To resolve the issue, a new port was opened, but it was not used, and used a new piece of mesh in the patient in order to complete the case.There was no patient injury.

Manufacturer Narrative

Evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.The evaluation found no potentially contributing factors, and the sample met all related specifications.It was reported that the mesh got stuck in the seal, and the seal dislodged.The reported issues could not be confirmed.The most likely cause could not be identified because no related problem was detected with the device.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.A secondary review of the device history records found no potentially contributing factors.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: PROGRIP
• Type of Device: MESH, SURGICAL, POLYMERIC
• Manufacturer (Section D): SOFRADIM PRODUCTION SAS; 116 avenue du formans; trevoux 01600 ; FR 01600
• Manufacturer (Section G): SOFRADIM PRODUCTION SAS; 116 avenue du formans; trevoux 01600 ; FR 01600
• Manufacturer Contact: justin ellis ; 8200 coral sea st ne; mounds view, MN 55112 ; 7635265677
• MDR Report Key: 18667418
• MDR Text Key: 334897163
• Report Number: 9615742-2024-00190
• Device Sequence Number: 1
• Product Code: FTL
• Combination Product (y/n): N
• Reporter Country Code: AS
• PMA/PMN Number: K143386
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date: 03/12/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 02/08/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: LPG1614
• Device Catalogue Number: LPG1614
• Device Lot Number: RWK0657X
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 02/22/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 11/09/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: SEE H10