MAUDE Adverse Event Report: SYNTHES GMBH SILICONE INSERT F/PLATE CUTTER 03.130.271; PLIERS, SURGICAL

Catalog Number 03.130.279

Device Problems Break (1069); Material Deformation (2976)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/01/2024

Event Type  malfunction  

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: b3: only the event year is known.D9: complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.E3: reporter is a j&j employee.H3, h4, h6: without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Event Description

It was reported that on an unknown date, the va hand plate cutter retaining clamp had broken and was no longer aligned with the plate cutter during surgery.There was no surgical delay or patient consequence.This report involves one silicone insert f/plate cutter 03.130.271.This is report 1 of 1 for (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Event Description

It was further reported the plate cutting handle has been bent outside of its intended shape and is no longer providing clean cuts to intended plates.It is very difficult to utilize and not working the way it was initially intended.

• Brand Name: SILICONE INSERT F/PLATE CUTTER 03.130.271
• Type of Device: PLIERS, SURGICAL
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 18694094
• MDR Text Key: 335220412
• Report Number: 8030965-2024-02298
• Device Sequence Number: 1
• Product Code: HTC
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• 2 Devices were Involved in the Event: 1 2

1 Patient was Involved in the Event

• Date FDA Received: 02/13/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 03.130.279
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 02/21/2024
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1