MAUDE Adverse Event Report: MEDTRONIC IRELAND RESOLUTE ONYX OTW; STENT, CORONARY, DRUG-ELUTING

Model Number RONYX22526W

Device Problem Leak/Splash (1354)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 02/19/2024

Event Type  malfunction  

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

An attempt was made to use one resolute onyx otw coronary drug-eluting stent to treat a moderately tortuous, severely calcified lesion in the distal left anterior descending (lad) artery. the device was inspected, with no issues.Negative prep was performed with no issues. the lesion was not pre-dilated. the device did not pass through a previously deployed stent.Resistance was not encountered when advancing the device.Excessive force was not used during delivery.It was reported that leak occurred at the luer/hub at 12 atms.It was detailed that two inflations were applied to the device prior to the issue occurring. the patient is alive with no injury.

Manufacturer Narrative

Additional information: the leak occurred at the hub.The leak occurred where the hub and catheter meet.There was no damage noted to the luer/hub of the device.There was no inflation difficulties associated with the leak.The device was connected to a non-medtronic inflation device.The stent was deployed and was post-dilated twice.The device was moved distal and inflated, and then moved proximal and inflated.The stent was implanted successfully.No intervention was required to implant the stent.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Product analysis: the device was received for analysis.The balloon returned in a post inflated state.No damage noted to the device.The device was leak tested however no leak was found.Additional testing was performed by an r and d subject matter expert (sme).The strain relief was removed exposing the area where the leak was reported to have occurred.The device was again leak tested utilising red die; if a leak path was present (partially/full) it would be visible utilising red die.No leak path (partially/full) was observed.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

Manufacturer Narrative

Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

• Brand Name: RESOLUTE ONYX OTW
• Type of Device: STENT, CORONARY, DRUG-ELUTING
• Manufacturer (Section D): MEDTRONIC IRELAND; parkmore business park west; galway ; EI
• Manufacturer (Section G): MEDTRONIC IRELAND; parkmore business park west; galway ; EI
• Manufacturer Contact: alison sweeney ; parkmore business park west; galway ; EI ; 091708096
• MDR Report Key: 18815095
• MDR Text Key: 336632704
• Report Number: 9612164-2024-01025
• Device Sequence Number: 1
• Product Code: NIQ
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P160043
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup,Followup
• Report Date: 05/03/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/01/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 04/07/2024
• Device Model Number: RONYX22526W
• Device Catalogue Number: RONYX22526W
• Device Lot Number: 0011157937
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 05/02/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 04/08/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Age: 68 YR
• Patient Sex: Female