MAUDE Adverse Event Report: SYNTHES GMBH ADAPT F/BLADE F/REMOVAL OF PFNA-BLADES; EXTRACTOR

Catalog Number 03.010.176

Device Problem Material Deformation (2976)

Patient Problem Insufficient Information (4580)

Event Date 02/26/2024

Event Type  malfunction  

Event Description

Device report from synthes reports an event in france as follows: it was reported that on february 26, 2024, there is a defective device on the loan kit.This report involves one (1) adapt f/blade f/removal of pfna-blades.This is report 1 of 1 for (b)(4).

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.D9: complainant part is not expected to be returned for manufacturer review/investigation.E1 initial reporter address line 1: pharmacie sgl19 57 rue francisque darcieux.G4: device is not distributed in the united states, but is similar to device marketed in the usa.H3, h4, h6: without a lot number the device history records review could not be completed.Product was not returned.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H3,h4,h6 the product was not returned to depuy synthes, however photos were provided for review.The photo investigation revealed that the tip of adapt f/blade f/removal of pfna-blades was bent.The observed condition of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.Since the device was not returned, a dimensional inspection cannot be performed.The overall complaint was confirmed as the observed condition of the adapt f/blade f/removal of pfna-blades would contribute to the complained device issue.Based on the investigation findings, potential cause can be attributed to component failure and it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.The device lot number is unknown, therefore a device history review could not be performed.  if the lot/serial number becomes available, the record will be re-assessed.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: ADAPT F/BLADE F/REMOVAL OF PFNA-BLADES
• Type of Device: EXTRACTOR
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 18836097
• MDR Text Key: 336876450
• Report Number: 8030965-2024-03184
• Device Sequence Number: 1
• Product Code: HWB
• UDI-Device Identifier: 07611819301887
• UDI-Public: (01)07611819301887
• Combination Product (y/n): N
• Reporter Country Code: FR
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/05/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 03.010.176
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 03/12/2024
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1
• Treatment: HOOK F/REMOVAL OF PFNA-BLADES