MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX® LUBRI-SIL® I.C. TEMPERATURE-SENSING ALL-SILICONE FOLEY CATHETER; TEMPERATURE SENSING FOLEY CATHETER

Catalog Number 119314

Device Problem Fracture (1260)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 02/22/2024

Event Type  malfunction  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.H11: section a through f - the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.

Event Description

It was reported that the doctor inserted the foley catheter in a male patient.This event occurred in a patient undergoing balloon insertion during ope.There was a crack in the shaft of the balloon (about 1cm below the three-pronged part).It was stated that there was urine leakage occurs from that area.None came into contact with the catheter and no pulling or towing.

Event Description

It was reported that the doctor inserted the foley catheter in a male patient.This event occurred in a patient undergoing balloon insertion during ope.There was a crack in the shaft of the balloon (about 1cm below the three-pronged part).It was stated that there was urine leakage occurs from that area.None came into contact with the catheter and no pulling or towing.

Manufacturer Narrative

The reported event is confirmed - cause unknown.Photo: received three (3) photo samples.All photo samples showcase an overview of an all silicone foley catheter.Visual: received one (1) used all silicone foley catheter without original packaging.Visual inspection noted a break in the catheter shaft measuring (0.1625").This is out of specification per inspection procedure, which states, catheter leaks, valve leaks, balloon perforation, lumen to lumen, prematurely deflated and dislodged balloon are not allowed, and must inflate and deflate with the use of a syringe.The potential root cause could be inadequate material selection.The device history record was reviewed and found nothing that could have caused or contributed to the reported event.The instructions for use were found adequate and state the following: "warning: after use, this product may be a potential biohazard.Handle and dispose of in accordance with applicable local, state, and federal laws and regulations.Caution: do not aspirate urine through drainage funnel wall.Storage: store catheters at room temperature away from direct exposure to light, preferably in the original box.Sterile unless package is opened or damaged.Warning: this product should never be connected to the temperature monitor or connected to a cable during an mri procedure.Failure to follow this guideline may result in serious injury to the patient.It is important to closely follow these specific conditions that have been determined to permit the examination to be conducted safely.Any deviation may result in a serious injury to the patient.Caution: as with all temperature probes, in the presence of rf energy sources, local heating, temperature errors, and probe damage may occur.Do not stretch catheter.This will cause repositioning of probe.Do not use stylet.This will cause stretching of catheter.Recommended inflation capacities 8 fr.And 10 fr.(3cc balloon): use 3.5cc sterile water 12 fr.(5cc balloon): use 5.5cc sterile water 14 fr.And larger (5cc balloon): use 10cc sterile water do not exceed recommended capacities.To deflate catheter balloon: gently insert a luer slip tip syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.If you notice slow or no deflation, re-seat the syringe gently.Allow the balloon to deflate slowly on its own.Do not aspirate or manually accelerate the deflation of the balloon.If permitted by hospital protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.Visually inspect the product for any imperfections or surface deterioration prior to use." h11: section a through f - the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.

• Brand Name: BARDEX® LUBRI-SIL® I.C. TEMPERATURE-SENSING ALL-SILICONE FOLEY CATHETER
• Type of Device: TEMPERATURE SENSING FOLEY CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• Manufacturer (Section G): C.R. BARD INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• Manufacturer Contact: xeeroy rada ; 8195 industrial blvd; covington 30014 ; 7707846100
• MDR Report Key: 18939635
• MDR Text Key: 339087380
• Report Number: 1018233-2024-01448
• Device Sequence Number: 1
• Product Code: MJC
• UDI-Device Identifier: 00801741039843
• UDI-Public: (01)00801741039843
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: K070582
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Other,User Facility
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 04/10/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/20/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 119314
• Device Lot Number: MYHP0071
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 03/06/2024
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 04/10/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 03/30/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Other
• Patient Sex: Male