Model Number ZA9003 |
Device Problems
Break (1069); Difficult to Insert (1316)
|
Patient Problems
Appropriate Clinical Signs, Symptoms, Conditions Term / Code Not Available (4581); No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 02/28/2024 |
Event Type
malfunction
|
Event Description
|
It was reported that after the non-preloaded intraocular lens (iol) was implanted in the patient's right eye, the lens was not sitting correctly.It was noted that the haptics were bent.Incision enlargement was required.The lens was removed from the eye and no lens was placed; the patient was left aphakic.The patient will see a retina specialist.No further information was provided.
|
|
Manufacturer Narrative
|
Section d6a: if implanted, give date: not applicable, as lens was removed during the same procedure.Section d6b: if explanted, give date: not applicable, as lens was removed during the same procedure.Section h3 - other (81): the device was not returned for evaluation; therefore, a failure analysis of the complaint device cannot be completed.A review of the device history record and complaint history for production order for this device will be performed.Upon completion of the review, if there is any further relevant information a supplemental medwatch will be filed.Section h6: health effect - clinical code (b)(4) is to capture incision enlargement.Attempts were made to obtain the missing information; however, no additional information has been received.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Manufacturer Narrative
|
The product was received for evaluation.Additional information: section d9: device available for evaluation? yes section d9: date returned to manufacturer: apr 4, 2024 section h3: evaluated by manufacturer: yes.Device evaluation: visual inspection of the complaint lens reveal that it was coated in viscoelastic residue.The lens was cleaned and no issues with the lens or haptics were observed.No issues that could cause or contribute to the complaint issues were observed.The complaint issue "haptic damaged" and "positioning issue" were not identified during product evaluation.Therefore, there is no indication of a product deficiency or product malfunction.Conclusion: based on the complaint investigation results, the product was released within specifications.No product deficiency or product malfunction could be identified.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Search Alerts/Recalls
|
|