Model Number NEU_ENS_STIMULATOR |
Device Problems
Human-Device Interface Problem (2949); Adverse Event Without Identified Device or Use Problem (2993); Unintended Movement (3026)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 03/18/2024 |
Event Type
malfunction
|
Event Description
|
It was reported that healthcare provider (hcp) struggled with getting the burr hole device screws to engage with the screwdriver and and screw into the skull.The screws kept falling out of the side of the plastic holders.Hcp did not like the design of the new screws.He said the long plastic guide tubes make it difficult to engage with the screw and the design of the screw itself is not as easy to use as our old screws and or cranial plating screws. screws had to be put back in to the guide tubes after falling out.He also cut part of the guide tube to shorten it to see if that helped but it did not. after struggling he was finally able to get the screwdriver and screws to engage.The issue was resolved.No symptoms reported.
|
|
Manufacturer Narrative
|
Section d references the main component of the system.Other medical products in use during the event include: medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
|
|
Manufacturer Narrative
|
Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
|
|
Event Description
|
Additional information received from manufacturer¿s representative (rep), which was confirmed with the healthcare provider (hcp), reported they felt the screws were too deep into the plastic guide tubes and the head of the screw didn¿t engage well with the screwdriver.When the hcp inserted the screwdriver into the guide tube the screws start to fall out the side of the tube.
|
|
Search Alerts/Recalls
|