A "replace sensor" error message was reported with the adc device and customer was unable to obtain readings.As a result, customer experienced tiredness, sweating and was unable to self-treat, requiring unspecified third-party treatment provided by their daughter.There was no report of death or permanent impairment associated with this event.
|
Sensor (b)(6) has been returned and investigated.Visual inspection was performed and no physical damage was observed on the sensor patch and sensor plug was properly seated in the mount.Data was extracted from returned sensor using approved software.Sensor was found to be in state 5 (indicating normal termination).Observed no failure modes upon visual inspection of the plug assembly.Sim vivo testing (simulation of the electrical signal produced by the sensor tail) was performed and all results were within specification.Additional testing has been performed for this issue and poise voltage testing was within specification, indicating the sensor was providing accurate glucose readings.All results were within specification.No malfunction or product deficiency was identified.Therefore, the issue is not confirmed.An extended investigation has been performed for the reported complaint and determined that there was no indication that the product did not meet specification.The dhrs (device history record) for the libre sensor and sensor kit were reviewed, and the dhrs showed the libre sensor and sensor kit passed all tests prior to release.All pertinent information available to abbott diabetes care has been submitted.
|