Model Number D-EVOLUTFX-34 |
Device Problems
Device Dislodged or Dislocated (2923); Activation Failure (3270)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 03/19/2024 |
Event Type
Injury
|
Manufacturer Narrative
|
Section d references the main component of the system.Other relevant device(s) are: brand name evolut fx valve; product id evolutfx-34 (serial: (b)(6)); product type: 0195-heart valves; implant date (b)(6) 2024.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
|
|
Event Description
|
Medtronic received information that prior to the implant of this transcatheter bioprosthetic valve in a patient with tortuous and ca lcified anatomy, a pre-implant balloon aortic valvuloplasty (bav) was performed.Following the bav, the valve was implanted in the annulus.As the delivery catheter system nose cone was withdrawn through the valve, it caught on the valve causing it to dislodge out of the annulus.Subsequently, a second valve was implanted, which resulted in approximately a 20 minute procedural delay.No additional adverse patient effects were reported.
|
|
Manufacturer Narrative
|
Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
|
|
Event Description
|
Additional information was received which confirmed that prior to slowly withdrawing the dcs, was the nose cone was centered within the frame inflow by slightly retracting the guidewire.Of note, a non-medtronic safari wire was used.The cusp overlap technique was used.
|
|
Manufacturer Narrative
|
Update data: h6 additional codes.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
|
|
Event Description
|
Additional information was received that during the valve implant, training guidance was follow for slow deployment.The valve was implanted within the native annulus.Of note, the patient had a tortuous abdominal aorta and endovascular abdominal aortic aneurysm repair (evar) noted.Per the physician, the cause of the dislodgment was due to the nose cone of the delivery catheter system (dcs) and valve being constrained from calcification.
|
|
Manufacturer Narrative
|
Updated h.6 medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
|
|
Search Alerts/Recalls
|