|
Model Number E3781R-28ASP |
Device Problems
Arcing (2583); Detachment of Device or Device Component (2907)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 03/21/2024 |
Event Type
malfunction
|
Manufacturer Narrative
|
H3 evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.Visual inspection noted that the outer black insulation was melted and slightly deformed at the aspiration holes.The tip broke off and was returned.The electrode had a lot of eschar.Functionally, a hipot test on the sample was performed and all of the test results were within specification.Tissue remained in the sheath side hole on the tip of the electrode.When eschar or tissue is stuck in the sheath side hole, there is a risk of arcing.It was reported that the device had arcing/sparking and the device broke during application.The reported issues were confirmed.The product analysis noted evidence that the device was not used as intended.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.The instructions included with this device provide the following guidance: tissue buildup (eschar) on the tip of an active electrode may create embers that pose a fire hazard, especially in oxygen-enriched e nvironments.Keep the electrode clean and free of debris.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
|
|
Event Description
|
According to the reporter, during a laparoscopic surgery, the device generated a lot of sparks when used in the abdominal cavity app roximately 5 hours after the start of the surgery.It was believed that the problem was caused by the burning of the eschar, but even after the tip was cleaned, the sparks seemed to be coming from part of the tube, attempt to find the right time to replace the device with another product of the same model number was urged and the tip got damaged, the damaged part was shaking and detached, it was grasped with a forceps and removed from the abdominal cavity.No x-ray was performed to locate and/or retrieve the broken piece.There was no patient injury.
|
|
Search Alerts/Recalls
|
|
|