• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: PRIMUS MEDICAL LLC PRIME CARE B900

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

PRIMUS MEDICAL LLC PRIME CARE B900 Back to Search Results
Model Number PCB900RH
Device Problems Break (1069); Material Integrity Problem (2978)
Patient Problem No Known Impact Or Consequence To Patient (2692)
Event Date 04/20/2015
Event Type  malfunction  
Event Description
Customer emailed saying that they had a broken bed frame weld.
 
Manufacturer Narrative
This bed frame was not returned for inspection but the customer did send a picture of the bed's broken weld.By looking at the picture it was determined that the bracket where the foot high-low actuator mounts onto the backbone of the bed frame separated.A new bed frame was shipped to the customer.This problem has been assigned capa (b)(4), and a follow-up report will be submitted upon completion of the corrective action.Metallurgical analysis report, dated 11/04/2011, on two removed sections from the bed-frame where the weld broke state both fractures had occurred at the heat affected weld zone at the toe of the attachment welds; there was significant distortion of the 1 x 2 inch rectangular tube typical of a high bending moment stress; the welding process employed (b)(4) was not suitable for the materials and thicknesses being joined; weld size was excessive; heat input was excessive; technique was poor resulting in excessive weld [s]platter and leaving from one to two inches of electrode (wirer) at weld terminations; weld penetration into the attachments was satisfactory however penetration into the tube was minimal; and examination of the wear pattern on the lever holes suggest a straight tension loading and the clevis holes indicate a push-pull load which is approximately 15 degrees off of horizontal.The failure appears to have been caused by the application of an overloaded stress with undetermined bending moment.The welding deficiencies did not cause the fractures but may have been a contributing factor.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
PRIME CARE B900
Manufacturer (Section D)
PRIMUS MEDICAL LLC
boardman OH
Manufacturer Contact
layla morris
8401 southern blvd
boardman, OH 44512
3309659681
MDR Report Key4787339
MDR Text Key5856690
Report Number3007538326-2015-00035
Device Sequence Number1
Product Code FNL
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
EXEMPT
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Unknown
Reporter Occupation Other
Remedial Action Recall
Type of Report Initial
Report Date 05/13/2015
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received05/19/2015
Is this an Adverse Event Report? No
Is this a Product Problem Report? No
Device Operator Other
Device Model NumberPCB900RH
Device Catalogue NumberSP01-PCB900RH
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? No
Date Manufacturer Received04/20/2015
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Unknown
Patient Sequence Number1
-
-