Catalog Number 031-33J |
Device Problem
Connection Problem (2900)
|
Patient Problems
No Consequences Or Impact To Patient (2199); No Patient Involvement (2645)
|
Event Date 08/27/2015 |
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(4).No visual or functional inspection can be performed since the device sample was not returned for evaluation.Failure mode could not be duplicated since is unknown the reason why the adaptor was not able to connect the nebulizer adapter with the flowmeter, however functional test was performed to 30 subassembly (p/n: 12161) no issues or discrepancies were found, the units were found according to specification.The device history record of the product 031-33j with batch number 74b1503150 has been reviewed and no issues or discrepancies were found that could potentially relate to this complaint.Based on similar complaints a capa file (b)(4) was opened to further investigate this issue.According to the capa investigation so far the root cause for the issue was the positioning of the thread lead and the softness of the new resin used for the snap adaptor.No conclusion can be established at this time based on the lack of device sample.It is necessary the physical sample in order to perform a properly investigation.If the device sample becomes available this complaint will be reopened.
|
|
Event Description
|
The customer alleges that they were unable to connect the nebulizer adaptor with the flowmeter and the screw-thread of the connector was stripped.The adaptor was replaced with a new one.No patient injury reported.
|
|
Manufacturer Narrative
|
(b)(4).The sample was returned for evaluation.A visual exam was performed and it was observed that the internal threads of the adaptor were damaged.Based on the visual exam, the reported complaint was confirmed.The root cause for the issue is the positioning of the thread lead and the softness of the new resin used for the snap adaptor.A capa was opened to address this issue.
|
|
Event Description
|
The customer alleges that they were unable to connect the nebulizer adaptor with the flowmeter and the screw-thread of the connector was stripped.The adaptor was replaced with a new one.No patient injury reported.
|
|
Search Alerts/Recalls
|