Pma/510(k)#: p100022 and s001.(b)(4).The ziv6-35-125-6.0-60-ptx stent of lot number c773934 was implanted in the patient therefore is not available for evaluation.With the information provided a document based investigation was carried out.It was confirmed that images would not be available to support the complaint investigation.According to information restenosis was confirmed at +/- 5mm of the stented lesion.Pta was performed and the patient recovered.Available information stated that the patient had pre-existing conditions including hypertension, diabetes and was a previous smoker.Restenosis is a common adverse event of endovascular procedures and can be caused by injury to the vessel (e.G.During pta and/or stenting).Vessel injury provokes an inflammatory response that leads to (or amplifies) the restenosis process.It may be noted that surface of the zilver ptx stent is coated with the drug (paclitaxel) to help prevent subsequent restenosis of the artery.It can be therefore stated that it is very unlikely that the reported restenosis could have occurred due to zilver ptx malfunction; however a definitive cause of this event cannot be determined.Due to lack of imaging no other comments can be made.It may be noted that restenosis of the stented artery is a known potential adverse event associated with placement of this device.Prior to distribution all zilver ptx devices are subject to visual inspection and functional checks to ensure device integrity.A review of the relevant manufacturing records revealed no discrepancies that could have contributed to this complaint.As no imaging was available to support the complaint investigation, the complaint is confirmed based on customer testimony.Quality engineering will continue to monitor complaints of this nature for potential emerging trends.Pma/510(k)#: p100022 and s001.(b)(4).The ziv6-35-125-6.0-60-ptx stent of lot number c773934 was implanted in the patient therefore is not available for evaluation.With the information provided a document based investigation was carried out.It was confirmed that images would not be available to support the complaint investigation.According to information restenosis was confirmed at +/- 5mm of the stented lesion.Pta was performed and the patient recovered.Available information stated that the patient had pre-existing conditions including hypertension, diabetes and was a previous smoker.Restenosis is a common adverse event of endovascular procedures and can be caused by injury to the vessel (e.G.During pta and/or stenting).Vessel injury provokes an inflammatory response that leads to (or amplifies) the restenosis process.It may be noted that surface of the zilver ptx stent is coated with the drug (paclitaxel) to help prevent subsequent restenosis of the artery.It can be therefore stated that it is very unlikely that the reported restenosis could have occurred due to zilver ptx malfunction; however a definitive cause of this event cannot be determined.Due to lack of imaging no other comments can be made.It may be noted that restenosis of the stented artery is a known potential adverse event associated with placement of this device.Prior to distribution all zilver ptx devices are subject to visual inspection and functional checks to ensure device integrity.A review of the relevant manufacturing records revealed no discrepancies that could have contributed to this complaint.As no imaging was available to support the complaint investigation, the complaint is confirmed based on customer testimony.Quality engineering will continue to monitor complaints of this nature for potential emerging trends.
|