The device was in use for treatment.A review of the device history record could not be performed as the lot number of the cable is unknown.Visual inspection of the returned cable found both connectors detached from the cable.The resistance through both cables was found to be within specification; however, the resistance measurements for both cables did not include the connectors.The cable failed at the solder joint on both connectors.The cause of the failure could not be determined as no information was provided with the returned device.The instructions for use (ifu) informs the user that the cable can be re-sterilized by oscor eto gas sterilization a maximum of two times.Precautions are provided to the user: do not connect any cable model to a/c power source; connection of exposed pins to a/c power source may pose a risk of serious injury or death.Additional information has been requested but not provided.A follow-up report will be sent if additional information becomes available.
|