The guidewire gripper was returned for review.Visual inspection revealed impact marks on the superior surface.A functional check confirmed that the 2.4mm hole securely gripped a guide wire, but the 3.0 mm hole failed to securely grip a guide wire.The threaded locking knob was also observed to bind.Device history records were reviewed for the device and identified no deviations or anomalies.This device is used for treatment.Based on the order running complete, it is believed the part was conforming when it left zimmer biomet.The instrument/provisional use, care and sterilization package insert states to inspect all product and ¿if damage or wear is noted that may compromise the function of the instrument, do not use the device and contact your zimmer representative for a replacement¿.The guidewire gripped was manufactured on january 30, 2014 and therefore had potential field ages of approximately 2 years 7 months, with the exact usage unknown.The most likely cause of the instruments not gripping is wear and tear from use.
|