• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: HALYARD - IRVINE HYHSURGPN,CB006,CBCMBO,-,OQ,5; ELASTOMERIC - COMBO

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

HALYARD - IRVINE HYHSURGPN,CB006,CBCMBO,-,OQ,5; ELASTOMERIC - COMBO Back to Search Results
Model Number CB006
Device Problem Device Operates Differently Than Expected (2913)
Patient Problem No Known Impact Or Consequence To Patient (2692)
Event Type  malfunction  
Manufacturer Narrative
The actual complaint product was not returned for evaluation.The device history record for the reported lot number was reviewed and documented that the lot was manufactured according to the approved manufacturing procedures, specifications, and then released by quality assurance.Root cause could not be determined.Halyard health has no independent knowledge of the event reported but is relaying the information that was provided by the user facility where the incident occurred.This product incident is documented in the halyard health complaint database and identified as complaint (b)(4).Device not returned.
 
Event Description
Fill volume: unknown, flow rate: unknown, procedure: unknown, cathplace: unknown.It was initially reported on (b)(6) 2017 that bolus button on a homepump was not functioning; the button would not stay down.The reporter noted that they could see a red piece showing.There was no reported patient use.Additional information received on 19-jan-2017 stated that the pump was connected to a patient.When the nurse tested the bolus button for the first time use, the button would remain in the down position.The pump was immediately removed from the patient, with no patient injury reported.The pump was noted as full of medication at the time.A photo received from the reporter displayed the ¿red piece¿ in the reservoir window instead of where the red priming key was.No further information received.
 
Manufacturer Narrative
One sample device was received.The bolus indicator received at the bottom position with the button in the upward position.The saf flow rates were verified for infusion.All the flow rates flowed except 0 ml/hr.The pca button was refilled to the top.The button was depressed and dispensed.The bolus button latched properly and dispensed the medication, the bolus had no issues refilling.The bolus dispensed 5.05 g of fluid.The pca was examined where the red key was inserted.No broken red key was observed in the pca unit.Bolus button testing was performed with the pressure set to 8.58 psi.The bolus was detached from the pump and the tubing was bonded back together with a male and female luer using cyclohexanone.The bolus unit was attached to the pressure gauge.The bolus button safety test results yielded an average delivery amount of 2.02 g; the average is within specifications.The bolus volume test results yielded an average delivery amount of 5.0325 g, all results are within specifications.The investigation summary concluded that the bolus button functioned as intended and observed no issues.During pca safety bolus test and bolus volume testing, results met specifications using the average bladder pressure.There were no kinks observed in the tubing or pump.The ¿not latching¿ button was not observed.All information reasonably known as of 21-apr-2017 has been included in this health authority report.Should additional information be obtained, a follow-up health authority report will be provided.The information provided by halyard health represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to halyard health.Halyard health has no independent knowledge of the event reported but is relaying the information that was provided by the user facility where the incident occurred.(b)(4).
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
HYHSURGPN,CB006,CBCMBO,-,OQ,5
Type of Device
ELASTOMERIC - COMBO
Manufacturer (Section D)
HALYARD - IRVINE
43 discovery
suite 100
irvine CA 92618
Manufacturer (Section G)
AVENT S. DE R.L. DE C.V.
ave noruega edificio d-1b
fraccionamiento rubio
tijuana, b.c.
Manufacturer Contact
lisa clark
5405 windward parkway
alpharetta, GA 30004
4704485444
MDR Report Key6322142
MDR Text Key67327046
Report Number2026095-2017-00009
Device Sequence Number1
Product Code MEB
UDI-Device Identifier10680651134742
UDI-Public10680651134742
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K063530
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type distributor,health profession
Reporter Occupation Other
Type of Report Initial,Followup
Report Date 04/11/2017
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Other
Device Expiration Date10/10/2018
Device Model NumberCB006
Device Catalogue Number101347405
Device Lot Number0202551258
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer02/21/2017
Is the Reporter a Health Professional? No
Initial Date Manufacturer Received 01/19/2017
Initial Date FDA Received02/10/2017
Supplement Dates Manufacturer ReceivedNot provided
Supplement Dates FDA Received04/28/2017
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured12/20/2016
Is the Device Single Use? Yes
Type of Device Usage Initial
Patient Sequence Number1
-
-