Conclusion: the device enterprise was not returned for analysis.Lake region medical reviewed the device history records relative to the manufacturing, inspecting and packaging of the above mentioned lot.The device history record review also included a review of the certificate of conformance received from specialty coatings systems and nitinol devices and components, along with lake region medical¿s internal receiving inspection records for the stents issued to the complaint lot.The history records indicate this product was final inspection tested at lake region medical and was determined to be acceptable.The resistance between the enterprise and the prowler select plus could not be confirmed without product return for analysis.Based on the information provided with no analysis, it is not possible to determine the root cause of the event; however, procedural/handling factors may have contributed to the event.Since there was no evidence to suggest the event was related to a manufacturing issue, no corrective actions will be taken at this time.This is an initial/final mdr report.This is 1 of 2 mdr reports submitted for this event, with associated report numbers of 3008264254-2017-00057 and 1226348-2017-00057.
|
As reported by a healthcare professional, during treatment of a 4.3 x 5.7mm posterior communicating artery aneurysm, an enterprise (enc452212/ 10689186) could not be advanced through the prowler select plus microcatheter (606s255x/ 17426075).They used a new stent and microcatheter to complete the procedure.There was no patient injury or procedure delay.A continuous flush had been maintained through the microcatheter and the microcatheter did not appear damaged or obstructed.The stent and stent delivery system did not appear damaged, and the stent did not prematurely detach.As the patient had hepatitis, the products had been discarded.
|