(b)(4).Complaint sample was evaluated and the reported event was not confirmed.The product was examined and found to have scratches, a gouge and some deformation likely caused by removal of the liner during the procedure.The product was checked to print and all dimensions are in tolerance except for the profile which is likely out of tolerance due to the deformation.Review of the mhr determined that as the product likely left zimmer biomet conforming to print, the complaint cannot be confirmed.The root cause cannot be determined.Dhr was reviewed and no discrepancies were found.If any further information is found which would change or alter any conclusions or information, a supplemental will be filed accordingly.Zimmer biomet will continue to monitor for trends.
|