• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: MEDTRONIC IRELAND RESOLUTE ONYX RX; STENT, CORONARY, DRUG-ELUTING

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

MEDTRONIC IRELAND RESOLUTE ONYX RX; STENT, CORONARY, DRUG-ELUTING Back to Search Results
Catalog Number RONYX40038X
Device Problems Migration or Expulsion of Device (1395); Device Damaged by Another Device (2915); Material Deformation (2976)
Patient Problems Myocardial Infarction (1969); Patient Problem/Medical Problem (2688)
Event Date 12/04/2017
Event Type  Injury  
Manufacturer Narrative
If information is provided in the future, a supplemental report will be issued.
 
Event Description
On (b)(6) 2017, two resolute onyx drug eluting stent devices (ronyx40038x; ronyx35038x) were used to treat a moderately tortuous lesion in the proximal rca.A right radial artery approach was used.There was no damage noted to device packaging.There were no issues when removing the devices from the hoop/tray.The devices were inspected with no issues.Negative prep was performed with no issues.The lesion was pre-dilated with a non-medtronic balloon.The first stent (ronyx40038x) did not pass through a previously deployed stent, did not encounter any resistance when advancing and no excessive force was used.This device was deployed in the proximal rca with no issues.The second stent (ronyx35038x) did pass through the newly deployed stent in the proximal rca, no resistance was encountered and excessive force was not used.This second stent (ronyx35038x) did not inflate, to deploy distal to the first stent.The 24 atm of pressure had been applied to the device when it was determined that there were inflation difficulties.When the ronyx35038x was being removed by a goose neck snare, it got caught on the first stent (ronyx40038x) causing the first stent to dislodge.It is reported that the ronyx35038x balloon did very partially inflate proximally and distally in the lesion and the stent seemed to have gone through initially on trying to remove it from the rca but it would not come through the launcher guide catheter and a goose neck snare was then used to remove the device.It was then discovered that something had happened the first stent (ronyx40038x) as nothing was seen on fluoroscopy.An ivus catheter was used to check via the femoral artery but no stent was visible, and on screening both stents were seen in the right forearm but having felt resistance at this point, the stents were left in the forearm.The ronyx35038x balloon had been removed through the radial sheath.Attempts were made to inflate the balloon outside the patient and the balloon still would not inflate despite using multiple inflation devices.A spiral dissection was observed in the rca.The patient was referred to the vascular surgeons, and the case was abandoned.The stents were surgically removed on the (b)(6) 2017.The patient suffered a right sided myocardial infarction following the procedure.A second attempt was made to inflate the ronyx35038x balloon.The balloon inflated under pressurisation, but in an unusual manner.
 
Manufacturer Narrative
Correction: date of event.Additional information: patient medical history included hypertension and osteoarthritis of the knee.The patient presented with troponin positive acs, with inferior wall hypokinesia suggestive of an rca infarct.The patient had previous surgery for ovarian cancer.It was noted that the rca likely had a spontaneous coronary artery dissection (scad), with significant luminal obstruction.A severe residual deep wall dissection was observed distal to the stent, so a decision was made to deploy another stent overlapping distally.As an attempt was made to retrieve the stent (ronyx35038x), it became crumpled and deformed on the proximal end.The physician managed to pass a 1.5mm balloon distally through the stent (ronyx35038x) and again tried to use this to retrieve the stent without success.The strut of the original stent that had been deployed proximally got caught and this too was unravelled and pulled out.The patient sustained a significant right coronary artery territory myocardial infarction as a result of the complications from the stent failing to deliver.The vascular surgery occurred without further complication and there was no residual vascular injury to the arm.The patient is expected to make a full recovery.The patient from a cardiac perspective was stable, with an echo confirming an inferior mi but no further chest pain or haemodynamic instability.Patient status is reported as alive with injury.If information is provided in the future, a supplemental report will be issued.
 
Manufacturer Narrative
Product analysis summary: no delivery system was returned for analysis, only stent.Stent was returned attached to an additional stent (pli-20) and a snare was returned.During initial analysis blood tissue was visible throughout both attached stents.Both stents and snare were placed in waterbath to disperse the blood.During visual analysis deformation was evident to the complete pli-10 stent, with wraps appearing badly stretched and bunching with pli-20 stent.Pli-10 stent could not be removed for attached pli-20 stent.Cine review: the target lesion in the proximal rca was confirmed through image review.The spiral dissection was observed in the rca post pre-dilatation activities.The first stent (ronyx40038x) was deployed in the proximal rca with no issues.The reported dissection was observed distal to the stent and the second stent (ronyx35038x) was delivered through the newly deployed ronyx40038x stent.The balloon of the ronyx3508x partially inflated in a "dog-boned" fashioned on the proximal end resulting in partial expansion of the proximal stent.Stent dislodgement was observed and during attempts to removed the stent and delivery system from the vessel.When the ronyx35038x was being removed by a goose neck snare it got caught on the first stent causing the first stent to deform and dislodge, as reported from the account.The presence of stents in the forearm was confirmed from the images.If information is provided in the future, a supplemental report will be issued.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
RESOLUTE ONYX RX
Type of Device
STENT, CORONARY, DRUG-ELUTING
Manufacturer (Section D)
MEDTRONIC IRELAND
parkmore business park west
galway
Manufacturer (Section G)
MEDTRONIC IRELAND
parkmore business park west
galway
Manufacturer Contact
toni o'doherty
parkmore business park west
galway 
091708734
MDR Report Key7132937
MDR Text Key95321860
Report Number9612164-2017-02026
Device Sequence Number1
Product Code NIQ
Combination Product (y/n)N
Reporter Country CodeUK
PMA/PMN Number
P160043
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,foreig
Reporter Occupation Physician
Type of Report Initial,Followup,Followup
Report Date 04/05/2018
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received12/20/2017
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date06/18/2019
Device Catalogue NumberRONYX40038X
Device Lot Number0008684187
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer12/14/2017
Is the Reporter a Health Professional? Yes
Date Manufacturer Received03/14/2018
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured06/18/2017
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Required Intervention;
Patient Age63 YR
Patient Weight85
-
-