The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.The information provided by bard represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bard.
|
Received 1 silicone catheter for evaluation.The reported event was confirmed as cause unknown.Per visual inspection no obvious defects were noted, and no cuff roll was observed.Per functional evaluation, the balloon was inflated with air and deflated.A cuff roll was not formed.After that, 10cc of a mix of water and blue methylene was introduced with a syringe and the catheter was left for 3 minutes resting on a flat surface.Then it was deflated by itself and a cuff roll was formed.The dimensional evaluation of the catheter was found within specification.The device history record was reviewed and found nothing that could have caused or contributed to the reported event.The instructions for use state the following: "to deflate catheter balloon: gently insert a syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.If you notice slow or no deflation, re-seat the syringe gently.Allow the balloon to deflate slowly on its own.Do not aspirate or manually accelerate the deflation of the balloon.If permitted by hospital protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by hospital protocol.Visually inspect the product for any imperfections or surface deterioration prior to use.".
|