WRIGHTS LANE SYNTHES USA PRODUCTS LLC 6MM TI STRAIGHT RADIAL STEM 24MM-STERILE; PROSTHESIS, ELBOW, HEMI-RADIAL, POLYMER
|
Back to Search Results |
|
Model Number 04.402.006S |
Device Problem
Unintended Movement (3026)
|
Patient Problem
No Code Available (3191)
|
Event Type
Injury
|
Manufacturer Narrative
|
Date of event is unknown.Device is expected to be returned for manufacturer review/investigation, but has not been received yet.(b)(4) used to capture additional medical/surgical intervention required.Device evaluation/investigation could not be completed; no conclusion could be drawn as product was not returned to manufacturer.Device history records review is pending completion.Device was used for treatment, not diagnosis.If information is obtained that was not available.
|
|
Event Description
|
It was reported that on (b)(6) 2015, patient was implanted with a radial prosthesis.On (b)(6) 2018, the implant was removed due to the radial stem becoming loose.Implant was not replaced.There was no report of patient harm.Concomitant devices reported: 18mm cocr radial head standard height/11.5mm-sterile (part# 09.402.018s, lot# 7838259, quantity 1).This report is for one (1) 6mm ti straight radial stem 24mm-sterile.This is report 1 of 1 for (b)(4).
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device history records review was completed for part# 04.402.006s, lot# 7785140.Manufacturing location: monument, manufacturing date: apr 15, 2015, expiry date: mar 31, 2020.Raw material part 21014 lot 7557656 was reviewed.Certificate of compliance received for ti from avalign met specification.Inspection sheet - incoming final inspection met inspection acceptance criteria.No non- conformance reports were generated during production.Review of the device history records showed that there were no issues during the manufacture of the product that would contribute to this complaint condition.Sterility documentation was reviewed and determined to be conforming.Product development investigation was completed.The reported complaint condition of loosening could not be confirmed at customer quality (cq) because no visual evidence of the device being loose in-situ was provided.Furthermore, there is no evidence on the returned part that indicates or confirms that a loosening occurred.Visual inspection under 5x magnification at cq revealed minor wear consistent with implantation and explantation.Whether this complaint can be replicated at cq via functional test is not applicable for this complaint condition.No new malfunctions were identified as a result of the investigation.This complaint is unconfirmed as no x-rays or evidence was provided.Relevant actions have been taken to address the issue.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Search Alerts/Recalls
|
|
|