• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: PENUMBRA, INC. PENUMBRA SMART COIL; HCG, KRD

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

PENUMBRA, INC. PENUMBRA SMART COIL; HCG, KRD Back to Search Results
Catalog Number 400SMTHXSFT0308
Device Problems Failure to Advance (2524); Physical Resistance (2578); Mechanical Jam (2983)
Patient Problem No Consequences Or Impact To Patient (2199)
Event Date 05/31/2018
Event Type  malfunction  
Manufacturer Narrative
Results: the pet lock was intact on the proximal end of the pusher assembly.The embolization coil was intact with its pusher assembly and had offset coil winds.Conclusions: evaluation of the first evaluated smart coil revealed that the embolization coil winds were offset.If the introducer sheath is not properly aligned inside the hub of the microcatheter prior to advancement, damage such as this may occur.While advancing the smart coil through a demonstration microcatheter, resistance was encountered as the embolization coil began to take shape inside the hub of the microcatheter.The smart coil could not be advanced any further.Evaluation of the second evaluated smart coil revealed that the embolization coil winds were offset and the smart coil was able to be advanced through the microcatheter.If the introducer sheath is not properly aligned inside the hub of the microcatheter prior to advancement, damage such as offset coil winds may occur.The smart coil was able to be advanced completely through the demonstration catheter and out of the distal tip without an issue.These offset coil winds likely contributed to the reported resistance.Penumbra coils are visually inspected during in-process inspection and during quality inspection after manufacturing.The manufacturing records for this lot were reviewed and did not reveal any outstanding discrepancies, design, or quality concerns.This report is associated with mfr report number: 3005168196-2018-01294.
 
Event Description
The patient was undergoing a coil embolization procedure using penumbra smart coils (smart coils).During the procedure, while attempting to advance a smart coil into an access sheath, the physician experienced resistance and the smart coil became stuck at the distal tip of its introducer sheath and would not enter the access sheath; therefore, it was removed.It was reported that the same issue occurred with another smart coil.The procedure was completed using additional coils and the same access sheath.There was no report of an adverse effect to the patient.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
PENUMBRA SMART COIL
Type of Device
HCG, KRD
Manufacturer (Section D)
PENUMBRA, INC.
one penumbra place
alameda CA 94502
Manufacturer Contact
veronica farris
one penumbra place
alameda, CA 94502
5107483200
MDR Report Key7652778
MDR Text Key112844593
Report Number3005168196-2018-01293
Device Sequence Number1
Product Code HCG
UDI-Device Identifier00814548015798
UDI-Public00814548015798
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K160832
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,health
Reporter Occupation Physician
Type of Report Initial
Report Date 05/31/2018
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Physician
Device Expiration Date01/09/2022
Device Catalogue Number400SMTHXSFT0308
Device Lot NumberF73638
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer06/19/2018
Is the Reporter a Health Professional? Yes
Initial Date Manufacturer Received 05/31/2018
Initial Date FDA Received06/29/2018
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured01/10/2017
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
-
-