Model Number FEM08120 |
Device Problem
Misfire (2532)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Type
malfunction
|
Manufacturer Narrative
|
No medical records and no medical images were provided to the manufacturer.The lot number for the device was provided.The device history records are currently under review.The device was returned to the manufacturer for evaluation.The investigation of the reported event is currently underway.The information provided by bard represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bard.
|
|
Event Description
|
It was reported that the stent graft allegedly would not fully deploy in a venous graft.Reportedly, another stent was used to complete the procedure.There was no reported patient injury.
|
|
Manufacturer Narrative
|
Manufacturing review: the lot records have been reviewed with special attention to the manufacturing and inspection of this product and the product was found to have met the specification prior to shipment.The review shows that no remarkable incidents occurred during the manufacturing process.No relevant manufacturing process changes were implemented that could have led to the event reported.No additional complaint has been previously reported for this lot number.Investigation summary: based on the evaluation of the returned sample the reported deployment failure could be confirmed.The stent graft was found partially deployed which indicated that high release force was present during the deployment attempt.Also during evaluation testing the stent graft could not be deployed further and the outer sheath elongated highly.No indication for a manufacturing related issue could be found.As a result of the investigation performed the complaint is confirmed.A definite root cause for the reported event could not be determined.Labeling review: in reviewing the valid labeling for this product it was found that the instructions for use (ifu) sufficiently address the potential risks.Regarding preparation of the device the ifu states: "prior to loading the endovascular system over a guide wire, both ports must be flushed with sterile saline.Flushing these lumens will also facilitate stent graft deployment." regarding the anatomy of the placement site the ifu states: "the safety and effectiveness of the device when placed across a tight bend has not been evaluated.Prior to stent graft deployment, ensure that the proximal (inflow) stent graft end is positioned in a straight section of the lumen to reduce the risk of higher deployment forces and possible endovascular system failure".Furthermore, the ifu states: "if unusual resistance or high deployment force is encountered during stent graft deployment, abort the procedure, remove the delivery system and use an alternative device." expiry date: mar / 2021.
|
|
Event Description
|
It was reported that the stent graft allegedly would not fully deploy in a venous graft.Reportedly, another stent was used to complete the procedure.There was no reported patient injury.
|
|
Search Alerts/Recalls
|