ARTHREX, INC. UNIVERS REVS CUP, 36/NEUTRAL CTD; SHOULDER PROSTHESIS, REVERSE CONFIGURATION
|
Back to Search Results |
|
Model Number UNIVERS REVS CUP, 36/NEUTRAL CTD |
Device Problems
Device Dislodged or Dislocated (2923); Naturally Worn (2988)
|
Patient Problems
Pain (1994); Loss of Range of Motion (2032); Toxicity (2333); No Code Available (3191)
|
Event Date 07/03/2018 |
Event Type
Injury
|
Manufacturer Narrative
|
Complaint confirmed.The returned ar-9502-36cpc met all as-received specifications.This device was identified to be concomitant to the glenosphere.An undamaged screw was returned with the cup, and no abnormalities were present with the threads of the cup screw.No significant damage to the cup was observed.Minor surface finish disruption approximately 180° from the extraction point was observed, as well as superficial scratches proximal to the extraction point.The most likely cause(s) of this event include non-compliance to the post-op protocol, or post-op trauma to the surgical site.Per device directions for use, until bone healing is complete, fixation given with this device should be considered as temporary and may not withstand weight bearing or other unsupported stress.
|
|
Event Description
|
It was reported by the sales rep that there was a revision of a right total shoulder case on (b)(6) 2018.The original date of surgery was (b)(6) 2015.The revision was due to limited range of motion and pain.Seven devices were removed from the patient; there was proximal metallosis in the shoulder joint and the glenosphere had disassociated from the baseplate.The following arthrex replacement devices were implanted: ar-9504l-04, univers reverse glenosphere, lot 170142415; ar-9502f-42cpc, univers reverse suturecup, lot 170117105; and ar-9503l-06, univers reverse humeral insert, lot 170170513.Additional information obtained 11/8/2018: sales rep has confirmed that his original report stating 7 devices were explanted was incorrect.Only the following three devices were explanted: ar-9503s-06 humeral insert (lot 2601221201), ar-9502-36cpc cup (lot 2501407907) and ar-9504s-04 glenosphere (lot 2501346003).All three devices are being returned to arthrex for evaluation.According to the medical records during the revision surgery, the surgeon discovered the glenosphere to be completely disassociated from the baseplate.The surgeon also noted a significant amount of wear on the inferior aspect of the humeral poly insert.The glenosphere, humeral insert and humeral cup were removed.The surgeon assessed the baseplate and stem and decided that they were stable and not otherwise disrupted.The surgeon then decided to replace the worn components that were removed with new components and chose to increase the size of the glenosphere cup and insert from a 36 to a 42 for added stability.
|
|
Manufacturer Narrative
|
Complaint confirmed.Returned ar-9503s-06 met all as-received specifications.Device was identified to be concomitant to the glenosphere.Visual evaluation revealed groove approximately 2.85mm deep present along the rim of cup.Witness mark consistent with damage caused during removal process was observed/present on cup approximately 180° from aforementioned groove.Some poly wear noted upon inspection.The glenosphere used for this surgery was not compatible with the baseplate.Arthrex¿s surgical technique guide provides a compatibility matrix which identifies the acceptable baseplate and glenosphere coupling and notes that the medium baseplate (ar-9120-02) is not compatible with a size 36 +4 glenosphere (ar-9504s-04).Arthrex¿s directions for use states that proper selection and placement of the implant are important considerations in the successful utilization of this device.Premature loosening and complications can occur with an unsuitable selection of the implant size.
|
|
Event Description
|
It was reported by the sales rep that there was a revision of a right total shoulder case on (b)(6) 2018.The original date of surgery was on (b)(6) 2015.The revision was due to limited range of motion and pain.Seven devices were removed from the patient; there was proximal metalosis in the shoulder joint and the glenosphere had disassociated from the baseplate.The following arthrex replacement devices were implanted: ar-9504l-04, univers reverse glenosphere, lot: 170142415; ar-9502f-42cpc, univers reverse suturecup, lot: 170117105; and ar-9503l-06, univers reverse humeral insert, lot: 170170513.Additional information obtained 11/8/2018: sales rep has confirmed that his original report stating 7 devices were explanted was incorrect.Only the following three devices were explanted: ar-9503s-06 humeral insert (lot :2601221201), ar-9502-36cpc cup (lot: 2501407907) and ar-9504s-04 glenosphere (lot: 2501346003).All three devices are being returned to arthrex for evaluation.According to the medical records during the revision surgery the surgeon discovered the glenosphere to be completely disassociated from the baseplate.The surgeon also noted a significant amount of wear on the inferior aspect of the humeral poly insert.The glenosphere, humeral insert and humeral cup were removed.The surgeon assessed the baseplate and stem and decided that they were stable and not otherwise disrupted.The surgeon then decided to replace the worn components that were removed with new components and chose to increase the size of the glenosphere cup and insert from a 36 to a 42 for added stability.Additional information obtained 1/7/2019: upon further review of the medical records provided by the patient, the glenosphere used for this surgery was not compatible with the baseplate.Arthrex¿s surgical technique guide provides a compatibility matrix which identifies the acceptable baseplate and glenosphere coupling and notes that the medium baseplate (ar-9120-02) is not compatible with a size 36 +4 glenosphere (ar-9504s-04).Arthrex¿s directions for use states that proper selection and placement of the implant are important considerations in the successful utilization of this device and premature loosening and complications can occur with an unsuitable selection of the implant size.
|
|
Search Alerts/Recalls
|
|
|