Model Number VT585 |
Device Problem
Contamination (1120)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 03/01/2019 |
Event Type
malfunction
|
Manufacturer Narrative
|
If implanted; give date: n/a (not applicable).The healon endocoat is not an implantable device.If explanted; give date: n/a (not applicable).The healon endocoat is not an implantable device; therefore, not explanted.(b)(6).All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Event Description
|
It was reported that doctor noticed unknown fiber while injecting ovd (ophthalmic viscosurgical device).As a result, the doctor tried to take it out with forceps, but it was too small and was lost.Then, the doctor thoroughly performed i/a (irrigation/aspiration) to ensure no presence of foreign material left behind in patient's eye.No additional information provided.
|
|
Manufacturer Narrative
|
Evaluation of the returned units confirmed returned fibers as identified by the customer.Visual evaluation under magnification could not confirm the presence of any particles or fibers observed within the remaining product solution.Characterization of the returned fibers confirmed the material to be composed of cellulose.Visible cellulose.Visible cellulose fibers are not inherent to the manufacturing process.Due to the opened nature of the return, the source of the returned fiber could not be conclusively confirmed.No manufacturing root cause could be determined.The manufacturing review indicates the lot was manufactured per procedure and meets the product specifications.Review of the complaint database over the past year indicates 5 potentially similar complaints have been received for healon endocoat products.Complaint review indicates there have been no trends identified for particulates within solution for all manufactured syringe products.As a result of this investigation, no specific manufacturing root cause could be determined.All pertinent information available to johnson and johnson surgical vision, inc.Has been submitted.
|
|
Manufacturer Narrative
|
This correction mdr is being submitted to address inaccurate information on the xml version of the previous submission caused by a software glitch in the transmission process.The internal non-conformance numbers for this software issue are (b)(4) and (b)(4).
|
|
Search Alerts/Recalls
|