MAUDE Adverse Event Report: HILL-ROM BATESVILLE AFFINITY 4 BED FRAME; TABLE, OBSTETRIC

Model Number P3700D000013

Device Problem Device Slipped (1584)

Patient Problem No Patient Involvement (2645)

Event Date 04/25/2019

Event Type  malfunction  

Manufacturer Narrative

The hill-rom technical support representative performed troubleshooting over the phone with the account.The technical support representative recommended replacing all four casters and the brake detent.Per the hill-rom service manual the affinity® three birthing bed and affinity® four birthing beds require an effective maintenance program.We recommend that you perform semiannual preventive maintenance.Check the tires for cuts, wear, tread life, etc.Apply the brake, and check to ensure that the bed will not move.If the bed moves, inspect it for wear, and adjust if required.Apply the steering pedal and check the steering to ensure proper locking action when activated.A search of the hill-rom maintenance records did not show hill-rom performed any preventative maintenance on this bed.It is unknown if the facility performs preventative maintenance on their beds.The account will replace the brake casters and detent to resolve the issue.Based on this information, no further action is required.

Event Description

Hill-rom technical support received a report from the account stating the brakes were not holding.The bed was located in labor and delivery at the account.There was no patient/user injury reported.This report was filed in our complaint handling system as (b)(4).

• Brand Name: AFFINITY 4 BED FRAME
• Type of Device: TABLE, OBSTETRIC
• Manufacturer (Section D): HILL-ROM BATESVILLE; 1069 state route 46 east; batesville IN 47006
• Manufacturer Contact: emily mitchell ; 1069 state route 46 east; batesville, IN 47006 ; 8129310130
• MDR Report Key: 8596778
• MDR Text Key: 144687042
• Report Number: 1824206-2019-00197
• Device Sequence Number: 1
• Product Code: KNC
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: K915779
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: user facility
• Reporter Occupation: Other
• Type of Report: Initial
• Report Date: 04/25/2019

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 05/09/2019
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Other
• Device Model Number: P3700D000013
• Was Device Available for Evaluation?: No
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 04/25/2019
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 08/29/2012
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1