MAUDE Adverse Event Report: TERUMO CARDIOVASCULAR SYSTEMS CORPORATION SHUNT SENSOR SYS500; BLOOD GAS MONITOR

Model Number CDI510H

Device Problem Leak/Splash (1354)

Patient Problem No Patient Involvement (2645)

Event Date 07/10/2019

Event Type  malfunction  

Manufacturer Narrative

Terumo has not received the device for evaluation; therefore, the investigation has yet to be completed.Terumo plans on submitting a follow-up report when the investigation is complete and when more information becomes available.(b)(4).

Event Description

The user facility reported to terumo cardiovascular that prior to cardiopulmonary bypass, during prime, a leakage was observed.No patient involvement.Product was changed out.Procedure was completed successfully.

Manufacturer Narrative

This follow-up report is submitted to fda in accord with applicable regulations ¿ and as indicated by terumo cardiovascular systems in the initial report submitted to the fda on july 31, 2019.  upon further investigation of the reported event, the following information is new and/or changed: d10 (device availability - added date returned to manufacturer).G4 (date received by manufacturer).G7 (indication that this is a follow-up report).H2 (follow-up due to additional information).H3 (device evaluation anticipated by manufacturer - a second follow-up will be submitted upon completion of the investigation and/or submission of new information, thus tcvs references conclusions code 11.) all available information has been placed on file in quality management for appropriate tracking, trending, and follow-up.

Manufacturer Narrative

This follow-up report is submitted to fda in accord with applicable regulations.Upon further investigation of the reported event, the following information is new and/or changed: h6 (identification of evaluation codes 10, 11, 3331, 213, 67).Method code #1: 10 - testing of actual/suspected device.Method code #2:11 - testing of device from same lot/batch retained by manufacturer.Method code #3: 3331 - analysis of production records.Results code: 213 - no device problem found.Conclusions code: 67 - no problem detected.The returned sample was visually inspected with no anomalies noted.The returned sample was then leak tested as received by connecting with the calibrated manometer, submerged into a water bath, and pressurized where the unit leaked at 100mmhg.The large bore adapter blue cap was then loosened and re-tightened by hand.The sample was leak tested the second time, and pressurized up to 1030 mmhg with no leaks noted.A retention sample from the same lot number was visually inspected and confirmed to have no traces of buffer on the outside of the unit or inside the pouch.It was then leak tested, pressurized with air up to 1030 mmhg, submerged in a water bath.No leaks were noted.The root cause for this event was determined to be the large blue vent cap for shunt sensor was not fully tightened either during setup of the circuit, or after the gas calibration.When the large blue vent cap was loosened, it had not been re-tightened fully prior to use in the line, causing a leak from the cap.All available information has been placed on file in quality management for appropriate tracking, trending, and follow-up.

• Brand Name: SHUNT SENSOR SYS500
• Type of Device: BLOOD GAS MONITOR
• Manufacturer (Section D): TERUMO CARDIOVASCULAR SYSTEMS CORPORATION; 125 blue ball road; elkton MD 21921
• MDR Report Key: 8848601
• MDR Text Key: 159594504
• Report Number: 1124841-2019-00210
• Device Sequence Number: 1
• Product Code: DRY
• UDI-Device Identifier: 00699753160767
• UDI-Public: (01)00699753160767
• Combination Product (y/n): N
• PMA/PMN Number: K972962
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,foreig
• Type of Report: Initial,Followup,Followup
• Report Date: 08/30/2019

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 07/31/2019
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 12/31/2019
• Device Model Number: CDI510H
• Device Catalogue Number: N/A
• Device Lot Number: XA21D
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 07/26/2019
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 08/28/2019
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1