MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX® LUBRICATH® FOLEY CATHETER CREEVY MODEL; LUBRICATH 3 WAY LATEX CATHETER

Model Number 01267522

Device Problems Deflation Problem (1149); Leak/Splash (1354); Device Fell (4014)

Patient Problems No Consequences Or Impact To Patient (2199); No Known Impact Or Consequence To Patient (2692)

Event Date 07/25/2019

Event Type  malfunction  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.The device was not returned.

Event Description

It was reported that the balloon leaked and caused the foley to fall out.

Manufacturer Narrative

The device was not returned for evaluation.A potential root cause for this failure could be "imperfection in balloon due to process".The lot number is unknown therefore the device history record could not be reviewed.The instructions for use were found adequate and state the following: ¿sterile unless package is opened or damaged.Warning: on catheter, do not use ointments or lubricants having petrolatum base.They will damage latex and may cause the balloon to burst.Caution: do not aspirate urine through drainage funnel wall.Storage: store catheters at room temperature away from direct exposure to light, preferably in the original box.Single patient use only.Do not reuse.Do not resterilize.For urological use only.Valve type: use luer slip tip syringe.Do not use needle.Recommended inflation capacities 3cc balloon: use 5ml sterile water 5cc balloon: use 10ml sterile water 15cc balloon: use 20ml sterile water 20cc balloon: use 25ml sterile water 30cc balloon: use 35ml sterile water 40cc balloon: use 45ml sterile water 75cc balloon: use 80ml sterile water do not exceed recommended capacities.Warning: after use, this product may be a potential biohazard.Handle and dispose of in accordance with applicable local, state, and federal laws and regulations.Bard and bardex are registered trademarks of c.R.Bard, inc.Or an affiliate.To deflate catheter balloon: gently insert a luer slip tip syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.Allow the pressure within the balloon to force the plunger back and fill the syringe with water.If you notice slow or no deflation, re-seat the syringe gently.Use only gentle aspiration to encourage deflation if needed.Vigorous aspiration may collapse the inflation lumen, preventing balloon deflation.If permitted by hospital protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by hospital protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.Visually inspect the product for any imperfections or surface deterioration prior to use.".

Event Description

It was reported that the balloon leaked and caused the foley to fall out.

• Brand Name: BARDEX® LUBRICATH® FOLEY CATHETER CREEVY MODEL
• Type of Device: LUBRICATH 3 WAY LATEX CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• MDR Report Key: 8901225
• MDR Text Key: 155034182
• Report Number: 1018233-2019-04802
• Device Sequence Number: 1
• Product Code: EZC
• UDI-Device Identifier: 00801741018817
• UDI-Public: (01)00801741018817
• Combination Product (y/n): N
• PMA/PMN Number: K910195
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,other
• Type of Report: Initial,Followup
• Report Date: 08/23/2019

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 01267522
• Device Catalogue Number: 01267522
• Was Device Available for Evaluation?: No
• Initial Date Manufacturer Received: 07/25/2019
• Initial Date FDA Received: 08/16/2019
• Supplement Dates Manufacturer Received: 08/20/2019
• Supplement Dates FDA Received: 08/23/2019
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1