• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: AESCULAP AG MULTIF.CLIP APPL.TI-P 10/370MM F/ML-CLIP; LAPAROSCOPIC SURGERY

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

AESCULAP AG MULTIF.CLIP APPL.TI-P 10/370MM F/ML-CLIP; LAPAROSCOPIC SURGERY Back to Search Results
Model Number PL606R
Device Problem Break (1069)
Patient Problem No Known Impact Or Consequence To Patient (2692)
Event Date 08/09/2019
Event Type  Injury  
Manufacturer Narrative
Manufacturing site evaluation: investigation on-going.Additional information / investigation results will be provided in a supplemental report.
 
Event Description
It was reported that there was an issue with the ligating clips.During a surgical prostatectomy assisted by davinci robot, the end of the plastic housing on a clip magazine broke apart and fell into the abdomen.There was an unspecified delay and intra-operative x-ray while attempting to search for the piece.No patient injury was reported; the broken piece was not detected.Additional information was not provided.The adverse event is filed under aag reference (b)(4).Associated medwatch: clip cartridge.
 
Manufacturer Narrative
Associated medwatch-reports: (b)(4) (400441683 pl569t), and (b)(4) (400449125 pl536r).Investigation results: following components were investigated: pl520r no visible abnormalities; functional test successful pl536r no visible abnormalities; functional test successful pl569t #1 used condition; 5 of 8 clips withdrawn pl569t #2 used condition; 4 of 8 clips withdrawn; broken nose; missing fragment investigation was carried out visually and micrsocopically.One of two clip cartridges has a broken off nose.The broken off fragment is missing.All other components of aesculap has no abnormalities.A review of the device quality and manufacturing history records was not possible because the lot number is unknown.The root cause is most likely usage related.The fracture surface of pl569tshows no signs of material fatigue, holes, pores, or any other abnormalities, therefore we can exclude production failures.The fracture was caused most likely from external forces that have overloaded the material.This could happen, when tissue is pressed with too high forces towards the jaw parts joint.A capa was not initiated.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
MULTIF.CLIP APPL.TI-P 10/370MM F/ML-CLIP
Type of Device
LAPAROSCOPIC SURGERY
Manufacturer (Section D)
AESCULAP AG
po box 40
tuttlingen, 78501
GM  78501
MDR Report Key8970636
MDR Text Key156796910
Report Number9610612-2019-00615
Device Sequence Number1
Product Code FZP
Combination Product (y/n)N
PMA/PMN Number
K081031
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,foreig
Type of Report Initial,Followup
Report Date 11/07/2019
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received09/06/2019
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model NumberPL606R
Device Catalogue NumberPL606R
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer08/27/2019
Date Manufacturer Received10/10/2019
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
-
-