OLYMPUS WINTER & IBE GMBH WORKING INSERT, ALBARRAN, ONE WAY; WORKING INSERTS WITH ALBARAN LEVER
|
Back to Search Results |
|
Model Number A20971A |
Device Problem
Material Fragmentation (1261)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 09/27/2019 |
Event Type
malfunction
|
Manufacturer Narrative
|
The suspect medical device has not yet been returned to olympus for evaluation / investigation.Therefore, the exact cause of the user's experience and the reported phenomenon could not be determined and is being judged as unknown.However, if the suspect medical device is returned for evaluation/investigation or additional significant information becomes available, this report will be updated.
|
|
Event Description
|
Olympus was informed that during an unspecified therapeutic cystoscopy procedure, the surgeon noticed foreign particles in the patient¿s bladder, which had come off the cystoscope during the procedure.However, no fragment remained inside the patient since the particles were reportedly retrieved.No further information was provided but there was no report about an adverse event or patient injury.
|
|
Manufacturer Narrative
|
The suspect medical device was returned to the manufacturer for evaluation/investigation.The evaluation/investigation confirmed that the working insert shows distinct signs of wear and tear on the whole of the instrument.There are sharp edges at the distal end of the instrument, the albarran pull rods are slightly deformed, and there are several dents on the optical tube.The adhesive in the gap between tube and main body has been worn out by frequent reprocessing and fragments of it are missing.The article was last repaired in july 2013 and has been in use since then.Therefore, in view of the long period of use of the subject device, the root cause of the reported phenomenon can most likely be attributed to use-related wear and tear.Since it is clearly stated in the instructions for use, the product has to be visually inspected and tested before use, this event/incident was attributed to use error.A manufacturing and quality control review could not be performed since basic data of article identification (lot number) are missing.The case will be closed on olympus side with no further actions.The reported event/incident will be recorded for trending and surveillance purposes.Furthermore, the user will be informed about the investigation results and retrained to correctly use the olympus medical devices.
|
|
Search Alerts/Recalls
|
|
|