MAUDE Adverse Event Report: ZIMMER GMBH FITMORE CUP

Model Number N/A

Device Problems Fracture (1260); Device Dislodged or Dislocated (2923); Insufficient Information (3190); Loosening of Implant Not Related to Bone-Ingrowth (4002)

Patient Problems Unspecified Infection (1930); Pain (1994)

Event Type  Injury  

Manufacturer Narrative

Concomitant medical products and therapy date detail of product: item number: unknown, item name: avenir stem, lot number: unknown.The manufacturer did not receive x-rays, or other source documents for review.The manufacturer did not receive the device for investigation.As no lot number was provided, the device history records could not be reviewed.Attempts to obtain additional information have been made; however, no more is available.A cause for this specific event cannot be ascertained from the information provided.As soon as supplemental information becomes available, an updated report will be submitted.Zimmer biomet¿s reference number of this file is (b)(4).Complaint linked to (b)(4).Item and lot numbers unknown.

Event Description

The tga has sent a deficiency based on the recent (b)(6) registry because one patient underwent revision surgery due to pain.

Manufacturer Narrative

Additional information which was received on nov 13, 2019.This follow-up report is being filled to relay additional information, which was unknown at the time of the previous medwatch.Additional: adverse event, initial reporter name and address, initial reporter health professional, initial reporter occupation.Updates:brand name, common device name, report source, evaluation codes, description of event or problem, date received by mfr, type of report, additional narrative.Should additional information become available and / or the device(s) be returned for evaluation and an investigation result be available, that changes this assessment, an amended medical device report will be submitted.Zimmer¿s reference number of this file is (b)(4).

Event Description

Patient was implanted on an unknown side and underwent revision potentially due to one of the following events: dislocation/infection/loosening/fracture/pain.

Manufacturer Narrative

This follow-up report is being submitted to relay updated and additional information.Event summary: it was reported by the therapeutic goods administration (tga) that the australian orthopaedic association national joint replacement registry (aoanjrr) has registered a higher than expected revision rate for a combination of avenir stem / fitmore cup used for total hip arthroplasty.The reason for revision surgery is unknown, but could however be one of the following: dislocation, infection, loosening, fracture and pain.Review of received data: data extract from the aoanjrr received for the higher than expected revision rate for a combination of avenir stem / fitmore cup used for total hip arthroplasty providing data such as: average duration of implantation, implant catalog ranges, reason for revision surgeries and years of which the products were revised.Devices analysis: no product was returned to zimmer biomet for in-depth analysis.4.Review of product documentation: all involved devices are intended for treatment.The compatibility check could not be performed as the complete product information is not known.Conclusion summary: it was reported by the therapeutic goods administration (tga) that the australian orthopaedic association national joint replacement registry (aoanjrr) has registered a higher than expected revision rate for a combination of avenir stem / fitmore cup used for total hip arthroplasty.The reason for revision surgery is unknown, but could however be one of the following: dislocation, infection, loosening, fracture and pain.Neither product identification, x-rays, operative notes, office visit notes, nor devices or photos of the explanted implants were received; therefore the condition of the components is unknown.Patient factors that may affect the performance of the components such as bone quality, activity level, type of activity (low impact vs.High impact), and relevant medical history are unknown.Adherence to rehabilitation protocol is unknown.It is only known that there was a revision surgery either due to one of the following events: dislocation, infection, loosening, fracture or pain.In conclusion, due to significant lack of information, it is impossible to perform a meaningful analysis of the reported event.Therefore, an exact root cause cannot be determined.The need for corrective measures is not indicated and zimmer gmbh considers this case as closed.Zimmer biomet¿s reference number of this file is (b)(4).The following reports are associated with this event: 0009613350-2019-00665, 0009613350-2019-00664.

Event Description

No change to previously reported event.

• Brand Name: FITMORE CUP
• Type of Device: FITMORE CUP
• Manufacturer (Section D): ZIMMER GMBH; sulzer allee 8; sulzer industrie park; winterthur 8404 ; SZ 8404
• MDR Report Key: 9294960
• MDR Text Key: 165577706
• Report Number: 0009613350-2019-00664
• Device Sequence Number: 1
• Product Code: KWY
• Combination Product (y/n): N
• PMA/PMN Number: N/A
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: foreign,health professional,s
• Type of Report: Initial,Followup,Followup
• Report Date: 01/27/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 11/08/2019
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Device Operator: Lay User/Patient
• Device Model Number: N/A
• Device Catalogue Number: UNKNOWN
• Device Lot Number: UNKNOWN
• Was Device Available for Evaluation?: No
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 01/16/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Removal/Correction Number: N/A
• Patient Sequence Number: 1
• Patient Outcome(s): Hospitalization; Required Intervention