WRIGHTS LANE SYNTHES USA PRODUCTS LLC ENDPIECE WITH DOUBLE JOINT; APPARATUS, TRACTION, NON-POWERED
|
Back to Search Results |
|
Model Number 394.44 |
Device Problem
Break (1069)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Type
malfunction
|
Manufacturer Narrative
|
The investigation could not be completed; no conclusion could be drawn, as no product was received.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported that on an unknown, during a routine incoming inspection of a loaner set, it was observed that the endpiece with double joint was broken.There was no known patient or hospital involvement.This report is for one (1) endpiece with double joint.This is report 1 of 1 for (b)(4).
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.D10: device returned.H3, h6: the device was received, the investigation is in progress, no conclusion could be drawn at the time of filing this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: h3, h4, h6- the customer reported the device was broken.The repair technician reported the device cotter pin, chain, and connecting missing; spring nut missing.Missing parts is the reason for repair.The following parts were replaced: cotter pin, chain & connecting, and spring nut.The item is not repairable per the inspection sheet.The cause of the issue is no bom.The item will be forwarded to customer quality.The evaluation was confirmed.The device was received intact at cq.There were no issues found.Since the device was already repaired at service center and is being scrapped due to no bom being available, the complaint can be confirmed for the reported condition.The complaint was confirmed due to the details in the attached service and repair documentation.The device was repaired due to missing components of the endpiece with double joint.No definitive root-cause can be determined.The component may have gone missing during a sterilization cycle.During the investigation no unidentified product design/manufacturing issues or discrepancies were observed that may have contributed to the complaint condition.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post market safety surveillance activities.No dhr can be completed since the lot number is unknown.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Search Alerts/Recalls
|
|
|