MAUDE Adverse Event Report: DEPUY MITEK LLC US CORDCUTTER *EA; SUTURE CUTTER

Model Number 214646

Device Problems Dull, Blunt (2407); Mechanical Jam (2983)

Patient Problem Not Applicable (3189)

Event Date 02/25/2020

Event Type  malfunction  

Manufacturer Narrative

Product complaint #: (b)(4).Device was used for treatment, not diagnosis.Udi: (b)(4).The lot number is unknown.

Event Description

It was reported by affiliate via email that during procedure, the cordcutter ea could not cut the sutures, the scissor got ¿stuck¿.No patient consequences, there was a surgical delay of 10 minutes reported.The device is available to be returned for evaluation.

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: investigation summary: according to the information provided, it was reported that during a procedure, the cordcutter *ea could not cut the sutures, the scissor got ¿stuck¿.The complaint device is not being returned, therefore unavailable for a physical evaluation.Since the complaint device was not returned, we cannot determine a root cause for the reported failure.If the device is received in the future, we will reopen the complaint and perform the investigation as appropriate.Given that no lot number was provided, a manufacturing record evaluation (mre) review cannot be performed.If the lot number becomes available, the mre review will be performed. at this point in time, no corrective action is required, and no further action is warranted.However, depuy synthes mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.

• Type of Device: SUTURE CUTTER
• Manufacturer (Section D): DEPUY MITEK LLC US; 325 paramount drive; raynham MA 02767
• MDR Report Key: 9901205
• MDR Text Key: 205324237
• Report Number: 1221934-2020-01018
• Device Sequence Number: 1
• Product Code: FZT
• UDI-Device Identifier: 10886705004270
• UDI-Public: 10886705004270
• Combination Product (y/n): N
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: foreign,health professional
• Type of Report: Initial,Followup
• Report Date: 03/16/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/30/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 214646
• Device Catalogue Number: 214646
• Device Lot Number: UNKNOWN
• Was Device Available for Evaluation?: Yes
• Date Manufacturer Received: 05/29/2020
• Patient Sequence Number: 1