Model Number CPHV |
Device Problem
Insufficient Information (3190)
|
Patient Problems
Thrombosis (2100); No Information (3190)
|
Event Date 02/02/2020 |
Event Type
Injury
|
Manufacturer Narrative
|
Device disposition presently unknown.
|
|
Event Description
|
On (b)(6) 2020 a patient received a carbomedics optiform f7-027 mechanical heart valve as part of an mvr.The manufacturer was notified that the device was explanted on (b)(6) 2020 and replaced with a carbomedics standard m7-031 mechanical heart valve.No further information was received.
|
|
Manufacturer Narrative
|
On (b)(6) 2020 a patient received a carbomedics optiform f7-027 mechanical heart valve as part of an mvr.The manufacturer was notified that the device was explanted on (b)(6) 2020 and replaced with a carbomedics standard m7-031 mechanical heart valve.The manufacturer received additional information from the site identifying the following.The optiform thrombosis occurred in the context of apparently therapeutic inr (2.5).At the time of reoperation, the device was covered in a thin film of pale white thrombus (possibly fibrin).This was completely cleaned off in situ so the leaflets could be tested and freely mobile without restrictions.Following neutralization of the heparin with protamine, the device clotted off again in the operating room.Returned back on pump with heparin and replaced the mitral valve with a standard device (larger size).No issues this time.Patient is alive and well with thrombosis service aiming for higher inr.(pt was a double valve case with aortic valve replacement done at initial surgery).Pathology identified thrombus on device.No mechanical comments made.It was identified by the patients family that the patient never bruised as a child from injuries and the site suspected a procoagulant state that was not clearly identified, hence why the patient has been quickly anticoagulated post-operatively.
|
|
Event Description
|
On (b)(6) 2020 a patient received a carbomedics optiform f7-027 mechanical heart valve as part of an mvr.The manufacturer was notified that the device was explanted on (b)(6) 2020 and replaced with a carbomedics standard m7-031 mechanical heart valve.The manufacturer received additional information from the site identifying the following.The optiform thrombosis occurred in the context of apparently therapeutic inr (2.5).At the time of reoperation, the device was covered in a thin film of pale white thrombus (possibly fibrin).This was completely cleaned off in situ so the leaflets could be tested and freely mobile without restrictions.Following neutralization of the heparin with protamine, the device clotted off again in the operating room.Returned back on pump with heparin and replaced the mitral valve with a standard device (larger size).No issues this time.Patient is alive and well with thrombosis service aiming for higher inr.(pt was a double valve case with aortic valve replacement done at initial surgery).Pathology identified thrombus on device.No mechanical comments made.It was identified by the patients family that the patient never bruised as a child from injuries and the site suspected a procoagulant state that was not clearly identified, hence why the patient has been quickly anticoagulated post-operatively.
|
|
Manufacturer Narrative
|
Based on the additional information received the valve displayed no mechanical issues or relationships to the event.The thrombosis was hypothesized to be a result of patient related factors.As such no further investigations will be performed at this time.The conclusion of the manufacturers analysis is thus cause cannot be traced to device : adverse event related to patient condition.
|
|
Search Alerts/Recalls
|