WRIGHTS LANE SYNTHES USA PRODUCTS LLC 9MM TI STRAIGHT RADIAL STEM 30MM-STERILE; PROSTHESIS, ELBOW, HEMI-RADIAL, POLYMER
|
Back to Search Results |
|
Model Number 04.402.009S |
Device Problem
Loose or Intermittent Connection (1371)
|
Patient Problems
Pain (1994); No Code Available (3191)
|
Event Date 01/01/2018 |
Event Type
Injury
|
Manufacturer Narrative
|
Date of event: only event year is known: 2018.Complainant part is not expected to be returned for manufacturer review/investigation.The investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.(b)(4).Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported that on (b)(6) 2018, the patient underwent a removal of the left elbow due to painful retained hardware involving the radial head replacement from synthes.On (b)(6) 2014, the patient had a left radial head fracture and underwent a replacement of the left radial head utilizing the synthes size 24 standard head and a size 9 mm straight stem.Concomitant devices reported: 24mm cocr radial head standard height/13.0mm-sterile (part number 09.402.024s, lot 7504369, quantity 1).This report involves one (1) 9mm ti straight radial stem 30mm-sterile.This is report 2 of 2 for (b)(4).
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported that on (b)(6) 2018, the patient underwent a removal of the left elbow due to painful retained hardware involving the radial head replacement from synthes.On (b)(6) 2014, the patient had a left radial head fracture and underwent a replacement of the left radial head utilizing the synthes size 24 standard head and a size 9 mm straight stem.On (b)(6) 2018, the patient had an ap lateral oblique views of the left elbow which shows a loose radial head implant.Concomitant devices reported: 24mm cocr radial head standard height/13.0mm-sterile (part number: 09.402.024s, lot: 7504369, quantity 1).This report involves one (1) 9mm ti straight radial stem 30mm-sterile.This is report 2 of 2 for (b)(4).
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: h3, h6: manufacturing location: supplier - (b)(4) / inspected, packaged and released by: (b)(4).Manufacturing date: april 10, 2013 expiration date: february 28, 2018 part number: 04.402.009s, 9mm ti straight radial stem 30mm ¿ sterile lot number: 7012246 (sterile) lot quantity: 48 work order traveler met all inspection acceptance criteria.Certificate of compliance received from (b)(4) dated february 1, 2013 was reviewed and determined to be conforming.Inspection sheet, incoming final inspection met all inspection acceptance criteria.Packaging label logs lppf, lmd/lpf were reviewed and determined to be conforming.Packaging bom was reviewed and determined to be conforming with no deviations to normal packaging identified.This lot met all dimensional, visual, sterility and packaging criteria at the time of release with no issues documented during the inspection or release of the product that would contribute to this complaint condition.Component part(s) reviewed: part number: 21014, tialnbri16.00 lot number: 6768793 lot quantity: (b)(4) lbs.Product traveler met all inspection acceptance criteria.Product certification supplied by dynamet dated august 22, 2011 was reviewed and determined to be conforming.Raw material receiving/putaway checklist met all inspection acceptance criteria.March 30, 2020 dhr reviewed this lot met all dimensional, visual, sterility and packaging criteria with no issues documented during the inspection or release of the product that would contribute to this complaint condition.Product was not returned.Based on the information available, it has been determined that no corrective and preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Manufacturer Narrative
|
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Search Alerts/Recalls
|
|
|