SMITH & NEPHEW, INC. UNKN R3 METAL LINER IMPL; PRSTHSS,HP,HM-,TRNNIN-BEARNG,FMRL,MTL/POLYACETAL
|
Back to Search Results |
|
Catalog Number UNKNOWN |
Device Problems
Mechanical Problem (1384); Adverse Event Without Identified Device or Use Problem (2993)
|
Patient Problems
Failure of Implant (1924); Pain (1994); Joint Dislocation (2374); Metal Related Pathology (4530)
|
Event Date 05/15/2020 |
Event Type
Injury
|
Event Description
|
Acetabular liner dissociation: a case report and review of the literature".Author: asif a.H.Parkaret al., edp sciences, 2019.It was documented on the paper that a (b)(6) patient had a tha performed using the smith & nephew r3 size 60 acetabular shell with 60/36 highly cross-linked polyethylene liner in the templated position.However, 5 years after the primary operation, the patient had a fall and presented with a new onset of hip pain.Evaluation of the radiographs showed a polyethylene liner dissociation (pld).A revision surgery was performed, the femoral component was stable and therefore retained.Surgery involved replacement of liner due to dislocation.In addition, the acetabular shell and the femoral head along with excision of a pseudo tumour resulting from metallosis were also removed, this was due to contact of the femoral head with the acetabular metal shell.
|
|
Manufacturer Narrative
|
The device, used for treatment, was not returned for evaluation.Therefore, product analysis could not be performed at this time.So the reported event could not be confirmed.A medical investigation was conducted and confirms the data presented in the article does not provide insight or relevance to current clinical outcomes for the product/device.Without clinically relevant patient-specific supporting documentation, a thorough medical investigation cannot be performed.The root cause and/or patient outcome beyond that which was documented in the article cannot be confirmed nor concluded.Therefore, no further interpretation of the attached x-ray(s) is required, and no further medical assessment is warranted at this time.Possible causes could include but not limited to traumatic injury, surgical technique or size of device.At this time, we have no reason to suspect that the product failed to meet any product specifications at the time of manufacture.Based on this investigation, the need for corrective action is not indicated.Without the actual product involved and/or device information, our investigation cannot proceed.If the device or new information is received in the future, this complaint can be re-opened.No further actions are being taken at this time.We consider this investigation closed.
|
|
Search Alerts/Recalls
|
|
|