|
Model Number IMPLANT SYSTEM, TRIM-IT DRILL PIN, 2X100 |
Device Problems
Delivered as Unsterile Product (1421); Material Protrusion/Extrusion (2979)
|
Patient Problem
Injury (2348)
|
Event Date 07/10/2020 |
Event Type
Injury
|
Manufacturer Narrative
|
The contribution of the device to the reported event could not be determined as the device was not returned for evaluation.The root cause of the event could not be determined from the information available and without device evaluation.
|
|
Event Description
|
It was reported that the k-wire was punctured through the package and injured the nurse.Due to this event, the device became unsterile.The surgery was successfully finished with a new device with the same part number.It was not necessary to switch the surgical technique or perform a second surgery.Surgery performed was a pip arthrodesis.Update 14-jul-2020: following update received: the wire has a protection cap which was perforated.The sterile package itself was intact and the devices inside of the package were sterile when opening the outer package.The nurse had a minor stab wound that bled a little.He could continue to work and has no additional complaints.
|
|
Manufacturer Narrative
|
The reported event and packaging allegation cannot be confirmed upon investigation of the returned product.Visual evaluation identified no apparent malfunction relating to the drill pins.The kit was received without any of its original packaging, and therefore, the as-received condition of the device cannot be confirmed.Additionally, the picture provided by the customer cannot confirm the packaging allegation or the reported event, as no breach in the sterile barrier can be found.The root cause of the reported failure mode is undetermined.However, the most likely cause is improper handling of the device.
|
|
Search Alerts/Recalls
|
|
|