MAUDE Adverse Event Report: JOHNSON & JOHNSON SURGICAL VISION, INC. IDESIGN AWS SYSTEM; REFRACTIVE MEASUREMENT

Model Number 0110-3450

Device Problem Adverse Event Without Identified Device or Use Problem (2993)

Patient Problem No Code Available (3191)

Event Type  Injury  

Manufacturer Narrative

(b)(4).Application support manager (asm) met with the physicians and reviewed patient charts.Customer was given an idesign outcome spreadsheet but they don¿t have enough data to completely fill out.They will be retreated once stable.Most likely will wait several months.Asm verified one patient was +1.75 but now resolved to +0.75.Asm was able to confirm over minus at the idesign on 50% of people we captured.On average over minus by about 1.00 to 1.50 diopters.Also looked at charts that were overcorrected.Discussed options with using physician adjustments with the physicians who calculate all treatments and explained the compensation for chromatic aberration and optical infinity.On the patients in question with overcorrections no physician adjustments made as he recalled ¿not to make any adjustments¿ per messaging.We discussed in great detail the ability to use physician adjustment but some do show a significant difference between manifest refraction (mr) and idesign and they have converted about 50% of surgical patients to wavescan on last surgery day.The system was evaluated by a field service engineer.The field service found the target brightness and single-line diagram (sld) power out of spec.Fse adjusted to spec and re-seated cable connections at back of personal computer (pc) for low vga signal voltage.A record review was performed.A product deficiency review was performed and there is no product deficiency identified.A document, service history, and trending was reviewed.There is not a recognizable adverse trend.The risks and mitigations associated with the complaint issue are identified in existing risk documents and no new risks were identified as part of this investigation.A labeling review was conducted; the operator manual for the system was reviewed and found to include adequate instructions for use, warnings and operational errors.The review of the device history record (dhr) for the idesign system showed that there were no issues or non-conformities.The system and its components met all specifications prior to being released.Manufacturing has been ruled out as a potential cause for the reported issue.Based on the investigation results, no corrective action has been issued.Based on the investigation results there is no indication of a product quality deficiency.Johnson & johnson surgical vision will continue to monitor this type of complaints.All pertinent information available to johnson & johnson surgical vision, inc has been submitted.

Event Description

Customer reported 17 overcorrections.Customer mentioned getting overcorrections of 1.00-1.50 diopters and occasional 2 diopters.This report is for the idesign aws system.A separate report will be submitted for the excimer laser system.

Manufacturer Narrative

This correction mdr is being submitted to address inaccurate information in section f on the xml version of the previous submission caused by a software glitch in the transmission process.The internal non-conformance numbers for this software issue are (b)(4) and capa-010215.

Manufacturer Narrative

The surgery center indicated dissatisfaction with the laser equipment and the treating surgeon indicated he has reviewed about 20 cases thus far and requested support.A j&j field service representative visited the site location and performed an upgrade on the idesign equipment.  johnson & johnson surgical vision will continue to monitor this type of complaints all pertinent information available to johnson & johnson surgical vision, inc has been submitted.

• Brand Name: IDESIGN AWS SYSTEM
• Type of Device: REFRACTIVE MEASUREMENT
• Manufacturer (Section D): JOHNSON & JOHNSON SURGICAL VISION, INC.; 1700 e st andrew place; santa ana CA 92705
• MDR Report Key: 10512097
• MDR Text Key: 206300180
• Report Number: 3006695864-2020-00423
• Device Sequence Number: 1
• Product Code: HKO
• UDI-Device Identifier: 05050474651432
• UDI-Public: (01)05050474651432
• Combination Product (y/n): Y
• PMA/PMN Number: K000327
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: health professional,user faci
• Type of Report: Initial,Followup,Followup
• Report Date: 01/01/2005,10/29/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 09/09/2020
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Model Number: 0110-3450
• Device Catalogue Number: 0110-3450
• Was Device Available for Evaluation?: Yes
• Was the Report Sent to FDA?: No
• Date Report Sent to FDA: 01/01/2005
• Date Report to Manufacturer: 01/10/2005
• Date Manufacturer Received: 10/25/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1
• Treatment: EXCIMER LASER SYSTEM SERIAL NUMBER (B)(6); EXCIMER LASER SYSTEM SERIAL NUMBER (B)(4)
• Patient Outcome(s): Other