• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: BOSTON SCIENTIFIC CORPORATION LOTUS EDGE VALVE SYSTEM; LOTUS EDGE TM VALVE SYSTEM

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

BOSTON SCIENTIFIC CORPORATION LOTUS EDGE VALVE SYSTEM; LOTUS EDGE TM VALVE SYSTEM Back to Search Results
Model Number H749LVSUS250
Device Problems Activation, Positioning or Separation Problem (2906); Adverse Event Without Identified Device or Use Problem (2993)
Patient Problems Aortic Dissection (2491); Pericardial Effusion (3271)
Event Date 11/06/2020
Event Type  Injury  
Manufacturer Narrative
The 25mm lotus edge delivery system was received for analysis.The lotus edge valve delivery system was returned over-sheathed and had no damage to the outer sheath.The outer sheath, multi-lumen extrusion and guidewire ports were flushed with 15ml saline each before the device was unsheathed.The lotus edge valve was not attached or returned as it was implanted during the procedure.Multiple kinks were noted to the nosecone extension which likely occurred when the device was re-sheathed post procedure without the support of a stylet.No other visual or functional issues were noted with the device.Procedural angiographic media was provided to assist in the investigation and was reviewed by a boston scientific medical director.Media shows the procedural clips chronologically start with a pre-deployment balloon valvuloplasty over the safari2 guidewire with a root angiogram.The balloon opened and deflated normally.An accompanying root shot whilst balloon open shows no abnormalities.The subsequent clips show deployment and release of the lotus edge valve into the correct anatomical position.The safari2 guidewire position was somewhat deep in the left ventricle, but the nosecone travels unimpeded on it.The final completion angiograms demonstrated that the lotus edge valve was in high annular position, and no aortic regurgitation or defects in coronary circulation were seen.The ascending aorta had a normal appearance and there was no aortic root extravasation visible.The temporary pacemaker wire was inserted from the neck, the inflation balloon open and situated very deep in the right ventricle.
 
Event Description
It was reported that an aortic dissection and pericardial effusion occurred.A 25mm lotus edge valve was selected for use in a transcatheter aortic valve replacement (tavr) procedure.An isleeve introducer sheath was placed via a right transfemoral access.The aortic valve was treated with balloon valvuloplasty with a 20mm non-bsc balloon catheter.The aortic valve was treated with subsequent deployment of the 25 mm lotus edge valve.Successful repositioning of the lotus edge valve involved partial re-sheathing and deployment into a more accurate position within the aortic annulus, in accordance with the instructions for use (ifu).The physician experienced difficulty locking the valve, but was ultimately successful.During final deployment, a pericardial effusion was observed via transthoracic echocardiogram.The physician suspected there was a small dissection in the annulus that occurred during the partial recapture or prior to the final valve deployment.The aortic dissection was sealed by the final deployment of the lotus edge valve and thus mitigated further extraction of blood in the pericardial space.However, the physician did not know the valve would seal the dissection, so a window was created to drain the pericardial effusion.The surgeon was not comfortable that it would cease, so then proceeded with open heart surgery.During open heart surgery, it was discovered that a pacer wire was through the free wall of the right ventricle, which was noted to have occurred when the patient's chest was opened.There were no further patient complications reported and the patient's condition is stable and improving.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
LOTUS EDGE VALVE SYSTEM
Type of Device
LOTUS EDGE TM VALVE SYSTEM
Manufacturer (Section D)
BOSTON SCIENTIFIC CORPORATION
two scimed place
maple grove MN 55311
Manufacturer (Section G)
BOSTON SCIENTIFIC CORPORATION
ballybrit business park
galway
EI  
Manufacturer Contact
jay johnson
two scimed place
maple grove, MN 55311
7634942574
MDR Report Key10945528
MDR Text Key219496135
Report Number2134265-2020-16091
Device Sequence Number1
Product Code NPT
UDI-Device Identifier08714729960911
UDI-Public08714729960911
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
P180029
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,health
Reporter Occupation Physician
Remedial Action Recall
Type of Report Initial
Report Date 12/03/2020
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received12/04/2020
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Health Professional
Device Expiration Date12/08/2020
Device Model NumberH749LVSUS250
Device Catalogue NumberH749LVSUS250
Device Lot Number0025810740
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer11/24/2020
Is the Reporter a Health Professional? Yes
Date Manufacturer Received11/06/2020
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured12/08/2019
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Removal/Correction Number92630745-FA
Patient Sequence Number1
Patient Outcome(s) Required Intervention;
Patient Age74 YR
-
-