MAUDE Adverse Event Report: DEPUY SYNTHES PRODUCTS LLC EMAX 2 PLUS MOTOR; MOTOR, SURGICAL INSTRUMENT, AC-POWERED

Model Number EMAX2PLUS

Device Problems Break (1069); Noise, Audible (3273); Excessive Heating (4030)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 01/01/2020

Event Type  malfunction  

Manufacturer Narrative

Device was used for treatment, not diagnosis.If information is obtained that was not available for this medwatch, a supplemental medwatch report will be filed as appropriate.The reporter¿s phone number and complete facility address were not provided the actual device has been returned and is currently pending evaluation.Once the investigation has been completed, and if additional information should become available, a supplemental medwatch report will be submitted accordingly.Udi: (b)(4).

Event Description

It was reported from (b)(6) that the locking mechanism of the motor device was damaged, and the device emitted heat and abnormal noise.It was not reported if the device was used in surgery, or if there was patient involvement.It was not reported if there were any delays in a surgical procedure or if a spare device was available.There were no reports of injuries, medical intervention or prolonged hospitalization.The exact date of the event was unknown.However, it was reported that the event occurred in 2020.All available information has been disclosed.If additional information should become available, a supplemental medwatch report will be submitted accordingly.

Manufacturer Narrative

This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.Device was used for treatment, not diagnosis.If information is obtained that was not available for this medwatch, a supplemental medwatch report will be filed as appropriate.H10 additional narrative: device evaluation: the actual device was returned for evaluation.During repair, an evaluation was performed, and it was determined that the reported condition was not confirmed.Therefore, an assignable root cause was not determined.However, during evaluation, it was determined that the device experienced unexpected noise.The assignable root cause was determined to be due to component failure from normal wear.

• Brand Name: EMAX 2 PLUS MOTOR
• Type of Device: MOTOR, SURGICAL INSTRUMENT, AC-POWERED
• Manufacturer (Section D): DEPUY SYNTHES PRODUCTS LLC; 4500 riverside drive; palm beach gardens FL 33410
• MDR Report Key: 11089410
• MDR Text Key: 224133237
• Report Number: 1045834-2020-02195
• Device Sequence Number: 1
• Product Code: GEY
• UDI-Device Identifier: 00845384002055
• UDI-Public: 00845384002055
• Combination Product (y/n): N
• PMA/PMN Number: K080802
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,foreig
• Type of Report: Initial,Followup
• Report Date: 12/20/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 12/29/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: EMAX2PLUS
• Device Catalogue Number: EMAX2PLUS
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 12/21/2020
• Date Manufacturer Received: 02/11/2021
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1