|
Model Number EMERALDT |
Device Problem
Material Too Rigid or Stiff (1544)
|
Patient Problem
Corneal Edema (1791)
|
Event Date 01/19/2021 |
Event Type
Injury
|
Manufacturer Narrative
|
Expiration date: not applicable as these inserter unfolder are sterilized by the user at their suite.If implanted; give date: n/a (not applicable).The inserter unfolder is not an implantable device.If explanted; give date: n/a (not applicable).The inserter unfolder is not an implantable device.Telephone: (b)(6).Manufacture date: unknown all pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Event Description
|
It was reported that the surgeon was unable to rotate the knob of the inserter as it was stuck, and that the fingers of the surgeon slipped causing the tip of the cartridge to touch and scratch the endothelium of the eye.The surgeon removed the cartridge tip from the patient's eye and applied a strong force and managed to rotate the knob.The lens was implanted normally.Through follow up we learned that the patient suffers from corneal edema caused by the scratch on the endothelium and medical intervention was prescribed.After testing the inserter, it was found that the emerald t inserter, had more resistance compared with the other emerald t inserters that they have.No further information provided.
|
|
Manufacturer Narrative
|
Device evaluation: the device was returned for evaluation.Therefore, product testing was performed, however the third party manufacturer a fails to replicate the condition, the root cause could not be identified therefore the complaint could not be confirmed.Manufacturing record evaluation: the manufacturing record were review for the inserter could was performed and revealed no evidence of non conformance to the affected lot as a result of the investigation there is no indication of product quality deficiency all pertinent information available to johnson and johnson surgical vision, inc.Has been submitted.
|
|
Search Alerts/Recalls
|
|
|