• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: STRYKER ORTHOPAEDICS-MAHWAH MODULAR DUAL MOBILITY INSERT; PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/CERAMIC/POLYMER, CEMENTED OR NON-POROUS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

STRYKER ORTHOPAEDICS-MAHWAH MODULAR DUAL MOBILITY INSERT; PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/CERAMIC/POLYMER, CEMENTED OR NON-POROUS Back to Search Results
Model Number 626-00-36C
Device Problems Corroded (1131); Adverse Event Without Identified Device or Use Problem (2993)
Patient Problem Pain (1994)
Event Date 02/24/2021
Event Type  Injury  
Manufacturer Narrative
Review of the device history records indicate devices were manufactured and accepted into final stock with no relevant reported discrepancies.There have been no other similar events for the lot referenced.Should additional information become available, it will be provided in a supplemental report upon completion of the investigation.
 
Event Description
Dr.Performed a revision surgery on (b)(6) 2021.He removed a cocr mdm liner from a trident ii cup that had been in 15 months.The pt.Complained of pain and effusion.Update 26/february/2021 wg: spoke to rep.Patient also had elevated ion levels.The mdm metal liner, adm/ mdm insert, and ceramic head were revised.Rep reported he may be able to confirm the operative side (as this patient has an identical, as-yet-not-revised construct in his other hip), and confirmed that no further information will be released by the hospital or surgeon.
 
Event Description
Dr.Performed a revision surgery on (b)(6) 2021.He removed a cocr mdm liner from a trident ii cup that had been in 15 months.The pt.Complained of pain and effusion.Update 26/february/2021 (b)(6): spoke to rep.Patient also had elevated ion levels.The mdm metal liner, adm/ mdm insert, and ceramic head were revised.Rep reported he may be able to confirm the operative side (as this patient has an identical, as-yet-not-revised construct in his other hip), and confirmed that no further information will be released by the hospital or surgeon.
 
Manufacturer Narrative
The following devices were also listed in this report: device: unknown trident ii clusterhole shell; cat#: unknown ; lot#: unknown.Reported event: an event regarding corrosion involving an mdm liner was reported.The event was confirmed based on product inspection.Method & results:  -device evaluation and results: visual inspection: visual inspection was performed as part of the material evaluation and indicated the following comments: the liner base material and debris were analyzed using energy dispersive spectroscopy (eds).The eds analysis showed that the liner was consistent with the drawing (astm f1537) and that the debris was consistent with an oxide and corrosion product.Dimensional inspection: not performed as the dimensional aspects are not in question.Functional inspection: not performed as the functional aspects are not in question.Material analysis: the liner base material and debris were analyzed using energy dispersive spectroscopy (eds).The eds analysis showed that the liner was consistent with the drawing (astm f1537) and that the debris was consistent with an oxide and corrosion product.-clinician review: no medical records were received for review with a clinical consultant.   -device history review: all devices were manufactured and accepted into final stock with no relevant reported discrepancies.  -complaint history review: there have been no other similar events for the reported lot.  conclusion: it was reported that the patient was revised due to corrosion.The event was confirmed based on product inspection.Visual inspection: visual inspection was performed as part of the material evaluation and indicated the following comments: the liner base material and debris were analyzed using energy dispersive spectroscopy (eds).The eds analysis showed that the liner was consistent with the drawing (astm f1537) and that the debris was consistent with an oxide and corrosion product.No further investigation is required at this time.If additional information becomes available to indicate further evaluation is warranted, this record will be reopened.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
MODULAR DUAL MOBILITY INSERT
Type of Device
PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/CERAMIC/POLYMER, CEMENTED OR NON-POROUS
Manufacturer (Section D)
STRYKER ORTHOPAEDICS-MAHWAH
325 corporate drive
mahwah NJ 07430
MDR Report Key11556032
MDR Text Key242172643
Report Number0002249697-2021-00519
Device Sequence Number1
Product Code LZO
UDI-Device Identifier04546540665997
UDI-Public04546540665997
Combination Product (y/n)N
PMA/PMN Number
K103233
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type health professional
Type of Report Initial,Followup
Report Date 07/12/2021
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received03/23/2021
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Health Professional
Device Expiration Date03/31/2024
Device Model Number626-00-36C
Device Catalogue Number626-00-36C
Device Lot Number70669801
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer03/11/2021
Date Manufacturer Received06/15/2021
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
Patient Outcome(s) Hospitalization; Required Intervention;
-
-