• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: APOLLO ENDOSURGERY, INC. ORBERA INTRAGASTRIC BALLOON SYSTEM; INTRAGASTRIC BALLOON,

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

APOLLO ENDOSURGERY, INC. ORBERA INTRAGASTRIC BALLOON SYSTEM; INTRAGASTRIC BALLOON, Back to Search Results
Model Number B-50000
Device Problem Mechanical Problem (1384)
Patient Problem Failure of Implant (1924)
Event Date 03/04/2021
Event Type  malfunction  
Manufacturer Narrative
Initial medwatch submitted to the fda on 03/29/2021.A review of the device labeling notes the following: the current orbera® intragastric balloon system directions for use (dfu) addresses the known and anticipated potential events of "failure to deploy" and "unsuccessful placement" are as follows: warnings and precautions: proper positioning of the placement catheter assembly and the orbera® system balloon within the stomach is necessary to allow proper inflation.Lodging of the balloon in the esophageal opening during inflation may cause injury and/or device rupture.The orbera® system balloon is composed of soft silicone elastomer and is easily damaged by instruments or sharp objects.The balloon must be handled only with gloved hands and with the instruments recommended in this document.Note: if the balloon becomes separated from the sheath prior to placement, do not attempt to use the balloon or reinsert the balloon into the sheath.Note: during the filling process the fill tube must remain slack.If the fill tube is under tension during the intubation process, the fill tube may dislodge from the balloon, preventing further balloon deployment.Warning: rapid fill rates will generate high pressure which can damage the orbera® system valve or cause premature detachment.
 
Event Description
The device malfunctioned which resulted in using a competitors device was used to complete the case.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ORBERA INTRAGASTRIC BALLOON SYSTEM
Type of Device
INTRAGASTRIC BALLOON,
Manufacturer (Section D)
APOLLO ENDOSURGERY, INC.
1120 s. capital of texas hwy
bldg 1, ste. 300
austin TX 78746
Manufacturer (Section G)
APOLLO ENDOSURGERY COSTA RICA, SRL
coyol free zone
building b 13.3
alajuela, cs
CS  
Manufacturer Contact
david hooper
1120 s. capital of texas hwy
bldg 1, ste. 300
austin, TX 78746
MDR Report Key11602005
MDR Text Key243655147
Report Number3006722112-2021-00022
Device Sequence Number1
Product Code LTI
Combination Product (y/n)N
Reporter Country CodeCS
PMA/PMN Number
P140008
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type distributor,foreign,health pr
Reporter Occupation Physician
Type of Report Initial
Report Date 03/19/2021
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received04/01/2021
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date09/18/2021
Device Model NumberB-50000
Device Catalogue NumberB-50000
Device Lot NumberAF03230
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Date Manufacturer Received03/19/2021
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Date Device Manufactured09/18/2019
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Age42 YR
Patient Weight78
-
-