Medical products: anatomical shoulder reverse, screw system, 4.5-33; catalog#: 01.04223.033; lot#: 2910488.Base plate 15 mm post length uncemented; catalog#: 00-4349-015-00; lot#: 64141394.Poly liner plus 0 mm offset 36 mm diameter; catalog#: 00-4349-036-00; lot#: 64063103.Humeral stem 10 mm stem diameter 130 mm stem length; catalog#: 00-4349-010-13; lot#: 63867841.Poly liner plus 0 mm offset 36 mm diameter; catalog#: 00-4349-036-00; lot#: 64422521.Therapy date: (b)(6) 2021.The manufacturer received x-rays for review.Other documents were received and will be reviewed as part of ongoing investigation.The manufacturer did not receive the device for investigation.Where lot numbers were received for the devices, the device history records were reviewed and found to be conforming.A cause for this specific event cannot be ascertained from the information provided.As soon as supplemental information becomes available an updated report will be submitted.Zimmer biomet¿s reference number of this file is (b)(4).
|
Review of event description: it was reported that the patient received an implant on (b)(6), 2019 and revised on (b)(6), 2021 due to pain and infection.Review of received data: - due diligence: no further due diligence required as all required information to support the conclusion is available or was already requested.- x-rays: the provided x-ray was not reviewed as the complaint is for infection, which is not visible on x-rays.- patient data: the provided lab results were reviewed and it was found the patient had proprione acnes, a type of gram-positive bacteria.The patient was treated with an antibiotic orally and by iv.The provided medical history of the patient identified a previous deep infection in 2018 resulting in finger amputations.Product evaluation: visual examination: the visual examination shows no signs of damage on either device.Review of product documentation: - device purpose: all involved devices are intended for treatment.- product compatibility: the product combination was approved by zimmer biomet.- dhr review: review of the device history records identified no deviations or anomalies during manufacturing.- ncr(s): no ncr with a potential correlation to the reported event was found.- sterilization certificate: the eto/ gamma sterilization specification of the device certifies the suitability of sterilization.The irradiation certificate of the affected lot number has been reviewed and was found to be according to specifications.Conclusion: it was reported that the patient received an implant on (b)(6), 2019 and revised on (b)(6), 2021 due to pain and infection.Sterilization certifications were reviewed and found to be conforming with no applicable deviations.Devices were verified to have gone through acceptable sterilization process following iso/aami/astm & eu published guidelines.There are multiple factors that may contribute to an infection that are outside the control of zimmer biomet, such as external factors, i.E.Hospital/surgical environment, provider related risk factors, and/or patient comorbidities/risk factors.As there are no indications of a product or process issues identified affecting implant safety or effectiveness, therefore implanted products are not identified as the source or contributing to the reported infection.Based on the investigation the reported event cannot be confirmed.The quality records show that all specified characteristics have met the specifications valid at the time of production.Therefore, the investigation did not identify a nonconformance or a complaint out of box (coob).The need for corrective measures is not indicated and zimmer switzerland manufacturing gmbh considers this case as closed.Zimmer biomet's reference number of this file is (b)(4).
|