Model Number BDI35DFRT |
Device Problems
Break (1069); Positioning Problem (3009)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 10/19/2021 |
Event Type
malfunction
|
Event Description
|
It was reported that an unknown patient underwent an unknown ablation procedure with a thermocool® sf bi-directional catheter.The tip was broken.The tip of the catheter was broken on intra-op.It's normal that the catheter has bi-directional curves (d/f), but one of the curves was broken during the procedure, so the physician could not manipulate the catheter properly.The physician requested to change the catheter.The catheter was replaced with new one, and it has curved well without any curve problem.After using new catheter, the procedure has successfully done.No wire was exposed and no lifting or sharp rings occurred.There was no reported resistance or difficulty during insertion or removal of the catheter.It was not a pre-shaped.Sheath was an agilis, 8.5f.Deflection issue is not mdr-reportable.Broken tip is mdr-reportable.
|
|
Manufacturer Narrative
|
If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.(b)(4).
|
|
Manufacturer Narrative
|
On 18-nov-2021, the bwi product analysis lab received the device for evaluation.The product investigation was subsequently completed.It was reported that an unknown patient underwent an unknown ablation procedure with a thermocool® sf bi-directional catheter.The tip was broken.The tip of the catheter was broken on intra-op.It's normal that the catheter has bi-directional curves (d/f), but one of the curves was broken during the procedure, so the physician could not manipulate the catheter properly.The physician requested to change the catheter.The catheter was replaced with new one, and it has curved well without any curve problem.After using new catheter, the procedure has successfully done.Device evaluation details: visual analysis of the returned sample revealed that no damage or anomalies were observed on the thermocool sf catheter.A deflection test was performed and it was found within specifications, the catheter was deflecting correctly.A manufacturing record evaluation was performed for the finished device [30584764l] number, and no internal actions related to the reported complaint condition were identified.No deflection or other issues were verified during the analysis.The instructions for use contain the following recommendations: inspect all components before use.The event described could not be confirmed as the device performed without any deflection issues.Although no product defect was identified, there may have been other circumstances or issues that occurred during the use of the device that could not be replicated during the laboratory analysis.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's reference number: (b)(4).
|
|
Search Alerts/Recalls
|
|