MAUDE Adverse Event Report: SANMINA -SCI SYSTEMS O-ARM O2 IMAGING SYSTEM; INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM

Model Number BI70002000

Device Problem Unintended Movement (3026)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 12/14/2021

Event Type  malfunction  

Manufacturer Narrative

If information is provided in the future, a supplemental report will be issued.

Event Description

Medtronic received information regarding an imaging system being used outside of a procedure.It was reported that the system is physically pulling to the right while driving.This was noticed outside of a case.There was no patient present.

Manufacturer Narrative

Concomitant product: product id: bi71000221, lot #: unknown, ubd: unknown, udi #: unknown, product id: bi71000463, lot #: unknown, ubd: unknown, udi #: unknown.A medtronic representative visited the site to evaluate the equipment.The rep replaced the digital drive board and strain gauges.Codes b01, c13, and d02 are applicable.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3.Product analysis for product bi71000463 was unable to confirm reported complaint of "pulling to the right." strain gauge passed continuity testing.Install strain gauge into test system c1396.The system booted and readied.Forward, backwards, left and right driving was fully functional.No fault found while under test.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3: the motion control board for the imaging system was returned to the manufacturer for evaluation.Analysis found that the reported issue could be replicated as voltage delivery drifted, resulting in driving issues.The hardware investigation found that the reported event was related to a hardware issue.This issue was documented in a medtronic navigation hardware anomaly tracking database.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: O-ARM O2 IMAGING SYSTEM
• Type of Device: INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM
• Manufacturer (Section D): SANMINA -SCI SYSTEMS; km 15.5 no. 29, plant 06; carr. chapala-guadalajara,jal 45640 ; MX 45640
• Manufacturer (Section G): SANMINA -SCI SYSTEMS; km 15.5 no. 29, plant 06; carr. chapala-guadalajara,jal 45640 ; MX 45640
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 13018432
• MDR Text Key: 283814269
• Report Number: 3006544299-2021-00453
• Device Sequence Number: 1
• Product Code: OWB
• UDI-Device Identifier: 00763000355555
• UDI-Public: 00763000355555
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K200074
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Company Representative
• Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 03/14/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 12/16/2021
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: BI70002000
• Device Catalogue Number: BI70002000
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Manufacturer Received: 03/02/2022
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 08/30/2021
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1