Model Number M00553200 |
Device Problems
Display or Visual Feedback Problem (1184); Adverse Event Without Identified Device or Use Problem (2993)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 03/01/2022 |
Event Type
malfunction
|
Manufacturer Narrative
|
Date of event: date of event was approximated to (b)(6) 2022 as no event date was reported.(b)(4).The device has not been received for analysis.Upon receipt and completion of the problem analysis of the complaint device, if there is any further relevant information from that review, a supplemental medwatch will be filed.
|
|
Event Description
|
It was reported to boston scientific corporation that a pneumatic inflator device was used in the cardia during a gastrointestinal dilatation procedure performed on an unknown date.During the procedure, it was noted that the pneumatic pump gauge stopped working after the second use.The procedure was completed without the use of this device.There were no patient complications reported as a result of this event.
|
|
Manufacturer Narrative
|
Block b3: date of event: date of event was approximated to (b)(6)2022 as no event date was reported.Block h6: device code a0902 captures the reportable event of gauge reading inaccurate.Block h10: investigation result a visual examination of the returned complaint device found that the needle was on the back side of the stop pin and it was noted to be loose.The inflator was hooked up to a test gauge and was attempted to be inflated with no success.A damage was noticed in the inner gears.The unit was disassembled and a movement break was found out which was possibly done during cleaning.The reported event was confirmed.The device problem is likely to happen during cleaning which were traced to improper routine or preventive maintenance.Therefore, the most probable root cause is cause traced to maintenance.A review of the device history record (dhr) was performed and confirmed that this device met all material, assembly and performance specifications.
|
|
Event Description
|
It was reported to boston scientific corporation that a pneumatic inflator device was used in the cardia during a gastrointestinal dilatation procedure performed on an unknown date.During the procedure, it was noted that the pneumatic pump gauge stopped working after the second use.The procedure was completed without the use of this device.There were no patient complications reported as a result of this event.
|
|
Event Description
|
It was reported to boston scientific corporation that a pneumatic inflator device was used in the cardia during a gastrointestinal dilatation procedure performed on an unknown date.During the procedure, it was noted that the pneumatic pump gauge stopped working after the second use.The procedure was completed without the use of this device.There were no patient complications reported as a result of this event.Correction noted on july 12, 2023.During the procedure, it was noted that the pneumatic pump gauge stopped working.The procedure was completed at this time and did not require device replacement.
|
|
Manufacturer Narrative
|
Block b3: date of event: date of event was approximated to 03/01/2022 as no event date was reported.Block h6: device code a0902 captures the reportable event of gauge reading inaccurate.Block h10: investigation result- a visual examination of the returned complaint device found that the needle was on the back side of the stop pin and it was noted to be loose.The inflator was hooked up to a test gauge and was attempted to be inflated with no success.A damage was noticed in the inner gears.The unit was disassembled and a movement break was found out which was possibly done during cleaning.The reported event was confirmed.The device problem is likely to happen during cleaning which were traced to improper routine or preventive maintenance.Therefore, the most probable root cause is cause traced to maintenance.A review of the device history record (dhr) was performed and confirmed that this device met all material, assembly and performance specifications.Block h11: correction: block b5 (describe event or problem) has been corrected.
|
|
Search Alerts/Recalls
|