MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 LUBRI-SIL FOLEY CATHETERS; UNKNOWN LUBRI-SIL FOLEY CATHETERS

Catalog Number UNKNOWN

Device Problem Adverse Event Without Identified Device or Use Problem (2993)

Patient Problems Incontinence (1928); Urinary Tract Infection (2120)

Event Date 03/14/2022

Event Type  Injury  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.The device was not returned.

Event Description

It was reported that the survey respondent mentioned symptomatic urinary tract infection, incontinence and catheter blockage while using the lubrisil hydrogel coated silicone foley catheter.It was unknown what medical intervention was provided for symptomatic urinary tract infection and incontinence.

Manufacturer Narrative

The reported event was inconclusive because no sample was returned.A potential root cause for this failure could be ¿incorrect size selected".It is unknown whether the device had met relevant specifications.The product was used for treatment purposes.It was unknown whether the product had caused the reported failure.The device was not returned for evaluation.The lot number is unknown; therefore, the device history record could not be reviewed.The instructions for use were found adequate and state the following: warning: on catheter, do not use ointments or lubricants having a petroleum base.They will damage the catheter and may cause balloon to burst.After use, this product may be a potential biohazard.Handle and dispose of in accordance with accepted medical practice and applicable laws, regulations, and policies.Keep away from sunlight.Do not store at freezing temperatures, keep at room temperature away from direct exposure to light, preferably in original box.Visually inspect the product for any imperfections or surface deterioration prior to use.If package is opened or if any imperfection or surface deterioration is observed, do not use.1.Open outer white wrapping to prepare sterile field and place underpad beneath patient, plastic side down.2.If patient has a catheter in-situ to deflate catheter balloon: gently insert a luer slip tip syringe in the catheter valve.Never use more force than is required to make the syringe ¿stick¿ in the valve.Allow the pressure within the balloon to force the plunger back and fill the syringe with water.If you notice slow or no deflation, reseat the syringe gently.Use only gentle aspiration to encourage deflation if needed.Vigorous aspiration may collapse the inflation lumen, preventing balloon deflation.If permitted by local protocol, the valve arm may be severed.If this fails, contact adequately trained professional for assistance, as directed by local protocol.Should balloon rupture occur, care should be taken to assure that all balloon fragments have been removed from the patient.3.Put on gloves, cover patient with fenestrated drape with open exposing location where catheter will be inserted, and place the apron on yourself.4.Using the two (2) syringes, marked ¿for cleansing purposes only¿, dispense the water onto three (3) gauze squares.Prepare the patient by wiping down the catheter insertion site with the saturated gauze squares.Dry patient with the remaining two (2) gauze squares.Note: do not use this syringe to inflate the catheter balloon.5.Prepare the lubricating gel syringe by removing the cap from the syringe tip.6.For easing the insertion of the catheter into the patient dispense the lubricating gel into the urethra (according to local protocol).7.Remove top tray and open plastic pouch (sleeve) surrounding the catheter.8.Proceed with catheterisation according to local protocol.To inflate catheter, simply insert tip of sterile water-filled syringe gently into valve (do not overpenetrate) and depress plunger.Instill entire amount of sterile water ¿ 10 ml.9.Attach statlock® foley stabilisation device to the bifurcation (y-shape) of the foley catheter (statlock® foley stabilisation device can be used for up to 7 days) and apply.(refer to the instructions for use provided with the statlock® pouch for more details).10.Position hanger on bedside rail near the foot of the bed using sheeting clip to secure drainage tube to sheet.11.The urine meter may be emptied in two ways: a.To empty into the bag, grasp the bottom of the meter and lift up.To ensure that the meter empties completely, lifting again is recommended.B.To empty urine meter into receptacle, twist green portion of drain valve to the left.To close, twist green portion of the drain valve to the right.12.To empty bag: a.To remove outlet tube from housing gently squeeze connector arms and pull tube from housing.B.Release clamp and empty bag.C.After emptying, reclamp outlet tube, and slide connector into housing until connector arms engage.Note: if specimen is required, see directions for using urine sample port.Refer to the folded product insert within the procedure pack for more details regarding the use of the urine meter.13.Periodic inspection of this system should be made to ensure that urine is flowing freely.If a standing column of urine is observed, check for correct positioning of bag and then for a physical obstruction.If correct positioning or removal of physical obstruction does not allow free flow, further investigation should be taken in line with local protocol.14.Catheters should be replaced in accordance with local policy.Correction: g h11: section a through f - the information provided by bard represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bard.H3 other text : the device was not returned.

Event Description

It was reported that the survey respondent mentioned symptomatic urinary tract infection, incontinence and catheter blockage while using the lubrisil hydrogel coated silicone foley catheter.It was unknown what medical intervention was provided for symptomatic urinary tract infection and incontinence.

• Brand Name: LUBRI-SIL FOLEY CATHETERS
• Type of Device: UNKNOWN LUBRI-SIL FOLEY CATHETERS
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• Manufacturer (Section G): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• Manufacturer Contact: juan velez ; 8195 industrial blvd; covington 30014 ; 7707846100
• MDR Report Key: 14052724
• MDR Text Key: 288869578
• Report Number: 1018233-2022-02125
• Device Sequence Number: 1
• Product Code: EZL
• Combination Product (y/n): N
• Reporter Country Code: UK
• PMA/PMN Number: K040504
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Other,Study
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date: 06/27/2022

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 04/08/2022
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Catalogue Number: UNKNOWN
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 06/27/2022
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Other